Playing with Lenses: Pentacon 4, 300mm F4, 19 blade iris.

advertise-here-275 Playing with Lenses: Pentacon 4, 300mm F4, 19 blade iris.
IMG_0629-300x224 Playing with Lenses: Pentacon 4, 300mm F4, 19 blade iris.
Pentacon 4, 300mm F4 on PMW-F3

UPDATED: SEE UPDATE AT END!

I won this lens on ebay for the grand total of £44.00. Now for that kind of money you don’t normally expect to get a great deal, but this time I got quite a lot. I certainly got a lot of weight and bulk, this is a big lens. It was designed to work with a Pentacon or Kiev medium format camera with a 6″x6″ frame size. The front element is about 3″ (80mm) in diameter, it’s over a foot long and weighs about 5lbs (2.5kg). One of the things that attracted me to it is the iris which has 19 blades giving a very round aperture, so the bokeh is very pleasant looking. The rear of the lens has a Pentacon to M42 mount onto which I screw a M42 to Nikon adapter ring. Due to it’s length and weight it is vital that the lens is supported. The lens comes with a 3/8″ mounting ring with a 3/8″ to 1/4″ insert.

IMG_0631-300x224 Playing with Lenses: Pentacon 4, 300mm F4, 19 blade iris.
19 Blade Iris.

For the moment I’m using the bracket from a Genus DSLR shoulder rig to support the lens until my new Genus lens support bracket arrives.
So… what are the pictures like? Well at F4 it’s a little soft, but stop it down to f5.6 and it sharpens up nicely. I also tried it with a 1.5x and 2x extender as these will soon show up any lens issues. With both the lens performed respectfully well with the iris at f5.6. Stop down to f8 and the lens really performs very well. Of course with the very small s35 sensor compared to the 6″x6″ that the lens was designed for you are only using the center part of the frame, which always tends to be the sharpest part. While it may not perform as well as the latest state of the art long focal length Canon’s or Nikons, this lens does do a pretty good job and if you only occasionally need a long lens, for the money it’s hard to beat.

IMG_0627-300x224 Playing with Lenses: Pentacon 4, 300mm F4, 19 blade iris.
Pentacon 4, 300mm, MTF adapter and F3

UPDATE: To get this lens to work on the F3 I was using a M42 to Nikon adapter. This has a corrective lens in it to enable infinity focus. After playing with this adapter on some other M42 lenses I found it’s performance to be less than satisfactory at large apertures. So I tried the Pentacon 4 again, but this time with a M42 to Canon adapter and one of Steve Shovlar’s new Adaptimax Canon to F3 adapters. The performance improvement was quite noticeable and now I can use the Pentacon fully open at f4 with great results. This really is a rather nice lens.

Advertisements

Leave a Reply

Your email address will not be published. Required fields are marked *

*