S-Log2 to Canon LUT’s for the FS7/F5/F55/A7s

advertise-here-275 S-Log2 to Canon LUT's for the FS7/F5/F55/A7s

More LUT’s for you to play with!

These LUT’s are primarily designed for the PMW-F5 and PXW-FS7 but they should also work with the PMW-F55 and A7s. You need to shoot in SGamut/S-Log2.

There are two types of LUT. The AC-Canon-Log versions will output Canon C-Log with Canon wide range colorspace while the AC-Canon-Look versions output using Canons wide dynamic range gamma. The C-Log versions should be a close match to a C300 shooting C-Log but the footage will need some grading as it is still log. The Canon Look versions will have better contrast and need less grading but have less dynamic range.

I don’t have a C300 to hand to test these, so I am not sure how close they are and it will vary a little depending on whether you use an FS7, A7s or F5/F55.

Click on the links below to download the LUT sets. PLEASE DO NOT HOST THESE ELSEWHERE OR DISTRIBUTE THESE ELSEWHERE OR VIA ANY MEANS OTHER THAN A LINK TO THIS PAGE.

Alisters S-log2 to Canon Luts

If you find the LUT’S useful, please consider buying me a beer or a coffee.


Type



pixel S-Log2 to Canon LUT's for the FS7/F5/F55/A7s

One thought on “S-Log2 to Canon LUT’s for the FS7/F5/F55/A7s”

  1. I’m not able to use a User3d LUT while in Slog2 base setting while in CineEI and therefore can’t use these Slog2 -> Canon LUTS. Under the overall “Monitor LUT” menu setting, while in Slog2, the USER3D LUT sub-menu is greyed out. Am I misunderstanding the workflow here?

Leave a Reply

Your email address will not be published. Required fields are marked *