XDCAM-USER.com

Alister 350 Scene files

Click on the link above to download a set of my latest scene files. Un-zip and copy to the root of an SxS card, the in the file menu load the files.

These are mainly matrix tweeks. neut2 is one I like that gives rich primary colours while still reasonably true to life. Cine1 is a sudo filmic look Film1 is meant to emulate well saturated film stock DSC-1 is based on Chroma-Du-Monde chart for accurate daylight color Neut is my first matrix tweak for a less green look and warmer skin tones.

PMW-350 Aperture Correction

After completing the multi camera shootout at Visual Impact, one thing was bothering me about the pictures from the PMW-350 and that was the way the specular highlights in the tin foil were artificially enhanced. During the test the camera was set to factory defaults, which IMHO are too sharp, but the foil in particular looked nasty. Since then I have been further refining my paint settings for the 350 and looking at detail and aperture. Today I was replicating the tin foil test and looking at the aperture settings (not the knee aperture) and I noticed that turning aperture on and off had a very pronounced effect on highlights but a much smaller effect elsewhere in the image. Normally I would expect the aperture setting to act as a high frequency boost making subtle textures more or less enhanced, which it does, but the amount of enhancement appears to vary with the brightness of the image with specular highlights getting a really big hit of correction. If you look at the images to the left at the top you have aperture correction on at +99. There are big ugly black lines around the highlights on the foil and the texture of the carpet has been enhanced. To some degree this is the expected behaviour although I am surprised by how thick the edges around the highlights are, this looks more like detail correction (it could be “ringing”). The middle images are aperture off, not zero but actually off and you can see that the edges on the foil have gone and the carpet is no longer enhanced. The bottom picture though with aperture on at -99 though is very interesting as the carpet appears slightly softer than OFF, which is not unexpected while the foils is sharper than OFF and this is not expected. I don’t like this behaviour I’m afraid to say as a typical way to get a filmic look from a video camera is to turn the detail correction off to give a natural picture and then use Aperture correction to boost high frequencies to retain a sharp image. On the PMW-350 you can’t do this as this as a high Aperture setting will give you those nasty edges on highlights. So what can you do? Well the 350′s native, un-enhanced resolution is very high anyway so it doesn’t need a lot of correction or boosting. The default Detail and Aperture settings will give some really nasty highlight edges so you need to back things off. If your going for a filmic look I would turn OFF aperture correction altogether, for video work with pictures that have some subtle enhancement I would use Aperture at around -20, certainly never higher than -15 unless you like black lines around specular highlights.

My current prefered detail, aimed at giving a very slight, not obvious enhancement are are as follows:

Detail Level -12, H-V Ratio +15, Crispening 0, Frequency +30, White Limit +30, Black Limit +40 (all other detail settings at default)

Aperture OFF for filmic look, Aperture -20 for video look.

I have also made some changes to the Matrix settings. I have been finding the pictures from Sony cameras to be a little on the Green/Yellow side so I have tweaked things a little to remove the yellow cast and put in a bit of red, this is a subtle change but really helps with skin tones, stopping on screen talent from looking ill! These settings work in the PMW-350, EX1/3 and PDW-700.

On an EX1/EX3 this works best with the Standard Matrix, On a PMW-350 or PDW-700 you can use it on it’s own or mix it with one of the preset matrices as a modifier. User Matrix On, R-G 0, R-B +5, G-R -6, G-B +8, B-R -15, B-G -9

Have Fun!

I have finally managed to get my hands on a production PMW-350. I am going to start dialing it in. The first thing to address for me is the over sharpened pictures, so I have been playing with the Paint settings aiming towards a natural, yet sharp look. I have come up with these detail setings. Everything is default except:

Detail Level -16
H/V Ratio +20
Detail Frequency +35
White limit +39
Black Limit +20
Aperture -30

This is still a work in progress.

Next I’m going to start looking at the Gamma curves and Knee. I have a nice Hamlet MicroFlex scope to help with this. Previously I have had to rely on my eye and then check the footage against the scopes in the edit suite, now I can see the waveforms on location. I’ll be writting up both the gamma settings and a microflex review in due course.

I have been asked to show how I mount my NanoFlash on my EX3 so below are a couple of pictures of the full rig with some details of some of the various items that I use.

1. This is my Petroff 4×4 matte box with bellows hood. I love the old fashioned style bellows lens shade as you can adjust it in and out very quickly to eliminate stray light. A french Flag can be added if desired, but I find in most cases that the bellows shade is fine. Stray light causes reflections both between filters and within the lens, this can reduce contrast in the image so a good lens hood is essential for getting the best pictures. The Matte Box has 2 rotating filter holders. I often use some very gentle blue or grey grads to help with bright skies.

2. The standard EX3 lens. This lens is a remarkably good lens. Keep it between F8 and F2.8 for best results. The sweet spot is F4. Never use the Iris at F16 or F11, your pictures will be soft due to diffraction limiting. This is not a lens fault but something that would happen with any lens and 1/2″ sensors (it’s even worse with smaller sensors). The beauty of the standard EX lens is that it incorporates automatic chromatic aberration correction which means no nasty blue or purple fringes around areas of high contrast.

3. SxS Cards. Even though I was one of the first people to work out how to use low cost SD cards with the fabled Kennsington Adapter I still use SxS cards. The reason is simple: reliability. If you look around the forums you will find lots of people having issues with SD cards. For example a wedding videographer that lost a large part of a service he had shot. If he had used SxS then that just would not have happened. I am a professional and my reputation is vital. That reputation could easily be destroyed if I came back from a shoot with nothing but corrupt data because I had tried to cut corners.

4. Kata Camera Glove. Protects the camera from everyday knocks and bumps as well as unexpected rain or dust.

5. The Cheek Pad. I know many EX3 users don’t fit these. It looks flimsy, but in use it’s strong enough and it really helps to stop the cameras tendency to want to tilt to the left. It makes the camera much more stable and really is worth trying.

6. Convergent Design NanoFlash. This incredible little box allows me to record from the HDSDi output at upto 160Mb/s long Gop. At 100 Mb/s you can’t tell the compressed from the uncompressed. By shooting with this I can grade and color correct my footage, make dubs, go multi generation without seeing any drop in quality. It also means my footage is accepted for HD broadcast by the BBC and the majority of other HD broadcasters. The EX 35Mb footage is good, don’t get me wrong but the 100Mb is sweet. It uses inexpensive Compact Flash cards and by recording to both SxS and the Nano at the same time I can be sure that even if I were to get a card failure I have a backup.

7. IDX V-Lock batteries. One of these will run this rig for around 5 hours. I am also looking at getting some of the Swit EX batteries with the Power-Con/D-Tap out to run the EX and NanoFlash, but by putting the battery out behind the camera the overall balance of the rig is improved. In fact without this larger battery the matte box tends to make it very front heavy.

8. Quick release shoulder pad. This is a home brew affair that incorporates a shoulder pad the V-lock battery adapter and NanoFlash or Radio Mic mount. It can be removed without tools in seconds. Perhaps one day I will get some Zacuto rails or similar, but they are rather expensive and this setup works very well for me.

9. Sony ECM-680S. This is a nice Stereo/Mono switchable gun mic. It is great for capturing nice stereo ambience and effects sound. Flick the switch and it becomes a useful interview mic.

10. DM accessories EX3 reinforcement plate. This is a MUST HAVE item. It provides you with a much stronger tripod fixing with both 1/4″ and 1/2″ threads as well as a host of other threaded holes for various applications. It makes the camera feel so much more solid on a tripod. I really can’t recommend it enough. below this is a cheap, Indian made Matte Box rail kit. It works, but again I could really do with some Zacuto rails or similar.

11. Chamois leather viewfinder cover. Much nicer against your skin than hard rubber. Also absorbs sweat and moisture which helps prevent the viewfinder from fogging. Another option is a small sweat band.

There is far too much emphasis on color charts and 100% one to one – set it up with a scope settings. Very often a 100% accurate one to one response won’t look right as the video gamut is smaller and lopsided than that of the human eye so a small amount of skewing of the color gamut can often help produce a picture that visually looks more natural. One of the very best ways to set up a camera is to use a high quality color photograph of a known scene. Shoot the photograph and look at the picture on a monitor and adjust until it looks right. This will give a more natural looking image than aligning with charts and scopes and is a technique that has been used since the very beginnings of color television. I have a scene that contains vibrant colored cars, green fields and trees, buildings and blue sky. I have a dozen large copies of this picture and use it whenever I am making camera adjustments to make sure my pictures still look natural. Of course scopes should still be used if you are making any extreme settings to ensure your images are still legal, but at the end of the day what you are after is an image that looks right too you (or the producer) and whoever else will view your material, not what looks right according to a chart and a scope.

If you set zebra 1 to 60 and then set zebra 2 to 90, then go back to zebra 1 you will find that the displayed value of zebra 1 will now be 90, however provided you don’t make any changes to zebra 1 if you go down to BOTH zebra 1 will work at 60 and zebra 2 at 90.

The thing is that going back to Zebra 1 (or zebra 2) and make any changes you select selects Zebra 1 (or 2) only, ie a single zebra and in doing so sets the level to the last level set. It’s only by going to BOTH that you enable both zebras together.

So to set two indendent zebras first set zebra 1 to your required level, then set zebra 2 to your required level, final scroll down to both and select. Now you zebras will be working at the independent levels you set, even though this may not appear to be the case in the menu.

It’s not the most logical way to lay out the menu as it does not show you both settings together at any point, hence the understandable confusion, but you will find that both zebras will work at the independent levels you set.