G'day Alister,
I need to film a rifle being fired and the recoil from it.
I know I will not be able to go so slow that I will see the bullet leave the barrel.
But I want to record the slowest possible speed and still get something!
What settings do you recomend?
It will be with a EX3
Thanks
Filming a Rifle recoiling
-
walkabouttv
- Posts: 4
- Joined: February 23rd, 2012, 4:10 pm
-
alisterchapman
- Site Admin
- Posts: 431
- Joined: February 1st, 2011, 7:43 pm
Re: Filming a Rifle recoiling
With the EX3 the best you can do is to set the camera to NTSC area with a base rate of 23.98p. Then use S&Q motion to shoot at 60fps. This will give around a 2.5x slow down.
You'd really be better off using an FS700 and shooting at 240fps.
You'd really be better off using an FS700 and shooting at 240fps.