Picture Profiles from PMW200 working on new PMW300?.

Discuss all aspects of the EX series camcorders here.
Post Reply
Chris Morphet
Posts: 1
Joined: March 1st, 2012, 11:08 pm

Picture Profiles from PMW200 working on new PMW300?.

Post by Chris Morphet » November 21st, 2013, 4:13 pm

Have just loaded up the picture profiles stored on an SxS card used on the PMW200 onto a new PMW300.
It seems to have worked that they can be transfered, but I need to study all the settings now on the PMW300,
and see if they are the same. Should these work seamlessly with the new camera or will you be putting up
some new ones for AC- Real 1 and AC- Asia 1.
alisterchapman
Site Admin
Posts: 426
Joined: February 1st, 2011, 7:43 pm

Re: Picture Profiles from PMW200 working on new PMW300?.

Post by alisterchapman » November 24th, 2013, 12:52 pm

Both cameras share the same sensors, but there is a difference in the DSP used, so there may be some very small differences. But any differences will be very minor and the profiles should basically work the same on either camera.
Post Reply