lens for PMW-500

Discuss any of the full size solid state XDCAM camcorders here.
Post Reply
Jerk
Posts: 9
Joined: February 6th, 2011, 12:38 pm

lens for PMW-500

Post by Jerk » February 6th, 2011, 12:53 pm

Hello.
Can you help to make right choice with lens that would take all advantages of pmw-500 camcoder for a reasonable price.
We are in process of buying and have no chance to test different lens because we don't have camcoder. The budget is around 10-15$ euro

We look on:
- Fujinon ZA17x7.6BERM-M - cheapest lens
- Fujinon HA16x6.3BERM
- Canon lens HDGC KJ17ex7.7 IRSE 17x

Or maybe you can advise any other lenses? And is there such difference between them in picture quality as in price?

Thank you!
alisterchapman
Site Admin
Posts: 431
Joined: February 1st, 2011, 7:43 pm

Re: lens for PMW-500

Post by alisterchapman » February 6th, 2011, 10:51 pm

The only one of those three lenses that I have direct experience of is the Canon KJ17 which is becoming a bit of a standard for HD ENG lenses. It's a good workhorse lens with good performance. I know of others that use the ZA17.7.6 and have heard good things about this budget HD lens. The HA16x6.3 is from Fujinon's mid range lens selection so in theory it should be better than the ZA, but whether your or your customers would ever see the difference is another matter.

Your best bet is to find a dealer that will let you try them side by side. Even then the differences will still only be small.
Jerk
Posts: 9
Joined: February 6th, 2011, 12:38 pm

Re: lens for PMW-500

Post by Jerk » February 7th, 2011, 7:49 am

Thank you, Alister! I think we will try Canon KJ17. I have heard on some video that Fujinon ZA17 have breathe effect while you work with focus.
alisterchapman
Site Admin
Posts: 431
Joined: February 1st, 2011, 7:43 pm

Re: lens for PMW-500

Post by alisterchapman » February 7th, 2011, 8:36 am

They all breathe. The HA16 breathes the least from what I've heard.
Jerk
Posts: 9
Joined: February 6th, 2011, 12:38 pm

Re: lens for PMW-500

Post by Jerk » February 7th, 2011, 8:56 am

And if it's no secret what lenses you use on your cameras?
Jerk
Posts: 9
Joined: February 6th, 2011, 12:38 pm

Re: lens for PMW-500

Post by Jerk » February 8th, 2011, 8:04 am

i found in you post about low cost lenses that you use Canon 16x8x2 IF lens :)
Post Reply