New PMW-400 shots too warm.

Discuss any of the full size solid state XDCAM camcorders here.
Post Reply
chrigurn
Posts: 3
Joined: August 14th, 2012, 6:31 pm

New PMW-400 shots too warm.

Post by chrigurn » May 14th, 2014, 9:14 am

I have just upgraded my PMW-350 to a new PMW-400 which I continue to use with my Canon HJ11x4.5 lens.

When I white balance though, the shots are all a little too warm - but they were fine using the same lens with the 350.

What could be causing this, and would a lens file help fix this (if so where do I find one) or else are there any settings I can tweak to fix this?
alisterchapman
Site Admin
Posts: 426
Joined: February 1st, 2011, 7:43 pm

Re: New PMW-400 shots too warm.

Post by alisterchapman » July 17th, 2014, 6:50 pm

A lens file won't help. Is it just a difference between the cameras processing or is the white balance off. Have you tried an all reset just to make sure there are no odd offsets set up anywhere.
Post Reply