PMW-200 Color bleed?

Discuss any of the full size solid state XDCAM camcorders here.
Post Reply
krusty4president
Posts: 1
Joined: December 16th, 2012, 10:11 pm

PMW-200 Color bleed?

Post by krusty4president » February 9th, 2015, 2:53 pm

Hi. I have a PMW-200 i use not very often. Two times when I have shot a concert and a musical i have hade horrible bleed in colors from colored stage spotlights. Especially red and blue. It bleeds out and makes stuff, especially noses is where it is most obvious, colors totally crap.
What can this be? Any settings or maybe some faulty gamma thing?
alisterchapman
Site Admin
Posts: 426
Joined: February 1st, 2011, 7:43 pm

Re: PMW-200 Color bleed?

Post by alisterchapman » March 4th, 2016, 9:52 pm

LED stage lights are incredibly intense over a very narrow part of the spectrum and will overload many cameras. There is very little you can do about it. Reducing the saturation in a picture profile and using a hypergamma may help a little, but it's not going to eliminate the problem.
alisterchapman
Site Admin
Posts: 426
Joined: February 1st, 2011, 7:43 pm

Re: PMW-200 Color bleed?

Post by alisterchapman » March 4th, 2016, 9:52 pm

LED stage lights are incredibly intense over a very narrow part of the spectrum and will overload many cameras. There is very little you can do about it. Reducing the saturation in a picture profile and using a hypergamma may help a little, but it's not going to eliminate the problem.
Post Reply