Settings S-log2 on A73
Posted: August 9th, 2018, 5:38 pm
Hi Alister
just some things about a little problem with my s-log2 settings on the Sony A73. This are my actual setting on my PP:
Black level: +5
Gamma: S-Log2
Black gamma: Wide, +2
Knee: Manual, 80%, Slope +2
Color mode: S-Gamut3.Cine
Saturation +3
Color phase +3
Color depth: R +2, G 0, B +3, C+3, M +2, Y +2
Detail: -7
I used a custom LUT for my SmallHD Focus monitor. Exposed looking at histogram to the right with zebra at 109%.
For the post I applied a custom LUT made in DaVinci Resolve and imported in FCPX.
Here comes my problem: I can see a lot of magenta big noise. Is this for missing informations in the 8bit Sony file or something wrong exposing the S-Log2?
Thank you very much
Vlad Moraru
just some things about a little problem with my s-log2 settings on the Sony A73. This are my actual setting on my PP:
Black level: +5
Gamma: S-Log2
Black gamma: Wide, +2
Knee: Manual, 80%, Slope +2
Color mode: S-Gamut3.Cine
Saturation +3
Color phase +3
Color depth: R +2, G 0, B +3, C+3, M +2, Y +2
Detail: -7
I used a custom LUT for my SmallHD Focus monitor. Exposed looking at histogram to the right with zebra at 109%.
For the post I applied a custom LUT made in DaVinci Resolve and imported in FCPX.
Here comes my problem: I can see a lot of magenta big noise. Is this for missing informations in the 8bit Sony file or something wrong exposing the S-Log2?
Thank you very much
Vlad Moraru