Alister,
Really like the Hyperdeck Shuttle... running out of SDI port A 1.5g Slog/4:2:2... however, when I try to record 720p60 or 1080 59.94i the Hyperdeck records (2) images stacked on top of one another. Blackmagic Design says both formats are supported by the Shuttle. Do I have to use a dual link recorder to get this to work correctly?
Understand if you are not familiar with the Shuttle... just thought you might have some insight.
Hyperdeck Shuttle 59.94i/720p60 issue
-
alisterchapman
- Site Admin
- Posts: 431
- Joined: February 1st, 2011, 7:43 pm
Re: Hyperdeck Shuttle 59.94i/720p60 issue
This is because the F3 outputs full Dual Link 1920x1080 60P from the A and B ports combined in these modes. If the F3 is set to 50i or 60i then the A/B output is either dual link 50/60p or 3G 50/60P.
The SDi Out will give a 720p50 or 720p60 output when the cameras is set to 720p, but not the A or B SDi's.
The SDi Out will give a 720p50 or 720p60 output when the cameras is set to 720p, but not the A or B SDi's.