HDMI out stops working when using Video Out.

Discuss the PMW-F3 and any other F series camcorders here
Post Reply
alisterchapman
Site Admin
Posts: 431
Joined: February 1st, 2011, 7:43 pm

HDMI out stops working when using Video Out.

Post by alisterchapman » September 26th, 2011, 9:31 pm

It appears that there is a limit to the number of outputs you can get simultaneously from the F3. If you plug composite monitor into the Video Out connector the HDMI output appears to stop working. I've seen this behaviour on several cameras with firmware V1.1 so it's not a broken camera, just a "feature" of the way the outputs work.
Top
louis
Posts: 47
Joined: February 15th, 2012, 9:36 am

Re: HDMI out stops working when using Video Out.

Post by louis » January 17th, 2013, 8:54 pm

same problem for me.....any one please.....
Top
alisterchapman
Site Admin
Posts: 431
Joined: February 1st, 2011, 7:43 pm

Re: HDMI out stops working when using Video Out.

Post by alisterchapman » January 23rd, 2013, 8:52 am

Yes, this is a limitation of the camera. It can provide an output via the A/B outputs plus a single output from either the HDSDI, Monitor or HDMI out.
Top
Post Reply

Return to “PMW-F series”