XD CAM PHU-22OR shows error message "no codec"

Discuss the PMW-F3 and any other F series camcorders here
Post Reply
louis
Posts: 47
Joined: February 15th, 2012, 9:36 am

XD CAM PHU-22OR shows error message "no codec"

Post by louis » August 2nd, 2013, 7:17 am

Hi Alister,

Thank you for your support and advices...

I am facing a problem with XDCAM TRANSFER FILES from PHU-220R hard disk....getting error message like "NO CODEC INCOMPLETE" When i am importing the files from PHU-220R cybershot hard disk through XD-CAM TRANSFER software.

Please find attached screen shot of that particular error message and give me the procedure to overcome this problem.

Appreciate your advice and suggestion in due course.

Thanks
Louis.
Attachments
Screen Shot 2013-07-26 at 5.05.23 PM.png
Screen Shot 2013-07-26 at 5.05.23 PM.png (150.82 KiB) Viewed 8851 times
alisterchapman
Site Admin
Posts: 431
Joined: February 1st, 2011, 7:43 pm

Re: XD CAM PHU-22OR shows error message "no codec"

Post by alisterchapman » October 22nd, 2013, 6:15 pm

The codec is part of the Final Cut Pro installation. Make sure you are running FCP7 and its up to date. This is very old software as has now been replaced by XDCAM-Browser.
louis
Posts: 47
Joined: February 15th, 2012, 9:36 am

Re: XD CAM PHU-22OR shows error message "no codec"

Post by louis » October 27th, 2013, 9:21 am

how can i import files through xd cam browser.....can i have the procedure....

Thanks
Louis.
Post Reply