audio output with sdi set to 24PsF

[discman]

Hello fellow forum members,

I have searched for this answer with no luck. I use a hyperdeck shuttle 2 to record the hd-sdi from my EX1, everything is fine when sdi is set to 60i--but I get no audio recorded when I set the sdi to 24PsF. Is this to be expected, or am I missing something?

Btw, my camera is set to record NTSC HQ 1080 24p.

thank you in advance for any answers.

-Trevor

[alisterchapman]

I suspect it's a shuttle limitation. Can you borrow an SDI equipped monitor to see if you can hear the audio on the monitor?