hello..I am new to PMW200..cant seem to get whit balance toggle switch to work..I dont seem to get preset setting..even when the camera is NOT in full auto mode
the toggle switch does not show preset fix balance..in other words even in preset if I press the while balance button in front of the camera, it starts colour balancing! It also
does not allow me to go to other settings of the toggle switch..I tried the menu without success..any help? Thanks
white balance toggle switch
-
- Posts: 18
- Joined: November 20th, 2012, 9:59 am
Re: white balance toggle switch
Having the menu on display:all prevent the white balance to be executed. At the time it happened to me I didn't know, so I reset to factory settings and all went back to normal.
Hope it helps.
Cheers
Hope it helps.
Cheers
Re: white balance toggle switch
Hi Thanks for your help..I am not keeping the menu on! however resetting did help but it is still weird..Now in Full Auto Mode off it stays in preset 3200 only..cant change..cant white balance.. same applies to Gain switch..it throws CAN NOT PROCEED dialogue..More help please.
Re: white balance toggle switch
Hi Guys
Found the problem..! In the Menu(OTHERS) one has to select PART instead of ALL to change these settings..
Thanks again.
Found the problem..! In the Menu(OTHERS) one has to select PART instead of ALL to change these settings..
Thanks again.
-
- Posts: 18
- Joined: November 20th, 2012, 9:59 am
Re: white balance toggle switch
I believe this is exactly the answer I gave you isn't it?
Re: white balance toggle switch
Oh Thanks Serge..did not realise..! Thanks for taking the trouble.It is working fine now.
Re: white balance toggle switch
I have also noticed another problem..first time I used it in FAT 35mbps mode..and the audio from external mic is full of hiss..Camera's built in mic osund is normal..
anyone had this problem?
anyone had this problem?