Tag Archives: PXW-FS7M2

cameras, PXW-FS7, Scene Files and Luts, Workflow

Scene files for the Sony PXW-FS7M2.

11 Comments

Here are some scene files for the PXW-FS7-II and original PXW-FS7. The first 5 scene files I published a couple of years ago but never got around to converting them over to the PXW-FS7-II. You can download the files in their correct folder structure to put on to an SD card so you can load them directly in to an FS7 or FS7-II. Or you can manually copy the settings from here. If copying the settings in manually I recommend you start by going to the “Files” section of the cameras menu and “Scene File” and import a “standard” default scene file from the cameras internal memory first to ensure you paint settings are at the original factory defaults prior to entering the settings by hand. The easiest way is to load the files linked at the bottom of the page onto an SD card and then go to the files section of the menu to load the scene files into the camera from the SD card.

If you find this LUT useful please consider buying me a cocktail or other beverage. Thank you! It does take a while to develop these LUT’s and contributions are a good incentive for me to create more!


Your choice:


The paint settings in for each of these setups are standard except for the items listed in each profile.

Scene File 1: AC-Neutral-HG4.

Designed as a pleasing general purpose look for medium to high contrast scenes. Provides a neutral look with slightly less yellow than the standard Sony settings. I recommend setting zebras to 60% for skin tones or exposing a white card at 75-80% for the best results.

Black: Master Black: -3.  Gamma: HG4 .  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Standard. User Matrix: ON. Level: 0. Phase: 0.

R-G: +10. R-B: +8. G-R: -12. G-B: -9. B-R: -5. B-G: -15.

Scene File 2: AC-Neutral-HG3

Similar to the above except better suited to lower contrast scenes or lower light levels. Provides a neutral look with slightly less yellow than the standard Sony settings. I recommend setting zebras to 60% for skin tones or exposing a white card at 75-80% for the best results.

Black: Master Black: -3.  Gamma: HG3 .  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Standard. User Matrix: ON. Level: 0. Phase: 0.

R-G: +10. R-B: +8. G-R: -12. G-B: -9. B-R: -5. B-G: -15.

Scene File 3: AC-FILMLIKE1

A high dynamic range look with film like color. Will produce a slightly flat looking image. Colours are tuned to be more film like with a very slight warm tint. I recommend settings zebras to 57% for skin tones and recording white at 70-75% for the most “filmic” look.

Black: Master Black: -3.  Gamma: HG7 .  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Cinema. User Matrix: ON. Level: -3. Phase: 0.

R-G: +11. R-B: +8. G-R: -12. G-B: -9. B-R: -3. B-G: -12.

Scene File 4: AC-FILMLIKE2

A high dynamic range look with film like color. Will produce a n image with more contrast than Filmlike1. Colours are tuned to be more film like with a very slight warm tint. I recommend settings zebras to 57% for skin tones and recording white at 70-75% for the most “filmic” look.

Black: Master Black: -3.  Gamma: HG8.  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Cinema. User Matrix: ON. Level: -3. Phase: 0.

R-G: +11. R-B: +8. G-R: -12. G-B: -9. B-R: -3. B-G: -12.

Scene File 5: AC-VIBRANT-HG3

These setting increase dynamic range over the standard settings but also increase the colour and vibrance. Designed to be used for when a good dynamic range and strong colours are needed direct from the camera. Suggested zebra level for skin tones is 63% and white at approx 75-80%.

Black: Master Black: -3.  Gamma: HG3.  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Standard. User Matrix: ON. Level: +23. Phase: -5.

R-G: +12. R-B: +8. G-R: -11. G-B: -6. B-R: -6. B-G: -17.

Scene File 6: AC-VIBRANT-HG4

These setting increase dynamic range over the standard settings but also increase the colour and vibrance. HG4 has greater dynamic range than HG3 but is less bright, so this variation is best for brighter high dynamic range scenes. Designed to be used for when a good dynamic range and strong colours are needed direct from the camera. Suggested zebra level for skin tones is 60% and white at approx 72-78%.Black: Master Black: -3.  Gamma: HG3.  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Standard. User Matrix: ON. Level: +23. Phase: -5.

R-G: +12. R-B: +8. G-R: -11. G-B: -6. B-R: -6. B-G: -17.

Scene File 7: AC-KODAKISH3200K (Include “Scene White Data – ON” when loading from the SD card).

This is a highly experimental scene file that uses a heavily tweaked matrix along with extensive colour adjustments via the multi-matrix. The aim being to reproduce a look reminiscent of Kodak film stock. The white balance is deliberately skewed very slightly bue/teal and then skin tones and orange shades boosted. When loading this scene file from an SD card you must also set “White Data” to ON to import the offset color preset. You can then either use the preset white balance or white balance using memory A/B and a white card. Do NOT use ATW.  This version is intended for use under TUNGSTEN lighting where the white balance would normally be 3200K. Please test that this profile produces a result you like before you start shooting with it as the look is quite strong and may be difficult to change later if you don’t like it. I recommend settings zebras to 57% for skin tones and recording white at 70-75% for the most “filmic” look.

White: Preset White 2800K

Offset White A: ON.  Warm Cool A: -25. Warm Cool Balance A: +10

Offset White B: ON.  Warm Cool B: -25. Warm Cool Balance A: +10

Black: Master Black: -3.  Gamma: HG4 .  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Cinema. User Matrix: ON. Level: -10. Phase: 0.

R-G: +61. R-B: +29. G-R: -6. G-B: -35. B-R: +21. B-G: -5.

MultiMatrix: ON

B: Hue -18, Saturation 0.

B+: Hue +5, Saturation 0.

MG-: Hue +5, Saturation 0.

MG: Hue +5 Saturation -7.

MG+: Hue 0, Saturation -3.

R: Hue -21, Saturation +65.

R+: Hue +0, Saturation +99.

YL-: Hue +39, Saturation +44

YL: Hue 0, Saturation 0.

YL+ Hue +20, Saturation -10.

G-: Hue -71, Saturation 0.

G: Hue -61, Saturation +10.

G+: Hue -23, Saturation +11

CY: Hue -40, Saturation +9.

CY+:Hue -22, Saturation +54.

B-:Hue +20, Saturation -5.

Scene File 8: AC-KODAKISH5600K (Include “Scene White Data – ON” when loading from the SD card).

This is a highly experimental scene file that uses a heavily tweaked matrix along with extensive colour adjustments via the multi-matrix. The aim being to reproduce a look reminiscent of Kodak film stock. The white balance is deliberately skewed very slightly bue/teal and then skin tones and orange shades boosted. When loading this scene file from an SD card you must also set “White Data” to ON to import the offset color preset. You can then either use the preset white balance or white balance using memory A/B and a white card. Do NOT use ATW.  This version is intended for use under daylight lighting where the white balance would normally be 5600K/6000K. Please test that this profile produces a result you like before you start shooting with it as the look is quite strong and may be difficult to change later if you don’t like it. I recommend settings zebras to 57% for skin tones and recording white at 70-75% for the most “filmic” look.

White: Preset White 4900K

Offset White A: ON.  Warm Cool A: -25. Warm Cool Balance A: +10

Offset White B: ON.  Warm Cool B: -25. Warm Cool Balance A: +10

Black: Master Black: -3.  Gamma: HG4 .  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: Cinema. User Matrix: ON. Level: -10. Phase: 0.

R-G: +61. R-B: +29. G-R: -6. G-B: -35. B-R: +21. B-G: -5.

MultiMatrix: ON

B: Hue -18, Saturation 0.

B+: Hue +5, Saturation 0.

MG-: Hue +5, Saturation 0.

MG: Hue +5 Saturation -7.

MG+: Hue 0, Saturation -3.

R: Hue -21, Saturation +65.

R+: Hue +0, Saturation +99.

YL-: Hue +39, Saturation +44

YL: Hue 0, Saturation 0.

YL+ Hue +20, Saturation -10.

G-: Hue -71, Saturation 0.

G: Hue -61, Saturation +10.

G+: Hue -23, Saturation +11

CY: Hue -40, Saturation +9.

CY+:Hue -22, Saturation +54.

B-:Hue +20, Saturation -5.

Scene File 9: AC-Minus-G1

A hand scene file to have for shooting under mixed lights or low quality lights where there is too much green. By using a combination of the FL-Light colour matrix and a custom preset matrix this profile reduces the some problematic green colour cast that can be present. It uses Hypergamma 3 to give a more pleasing highlight roll off and increased dynamic range without reducing the low light performance. Great for office interviews! I recommend setting zebras to 62% for skin tones and recording white (white card) at between 75 and 80% for the best results.

Black: Master Black: -3.  Gamma: HG3 .  White Clip: OFF.  Aperture : OFF

Matrix: ON. Adaptive Matrix: Off. Preset Matrix: ON. Preset Select: FL Light. User Matrix: ON. Level: 0. Phase: 0.

R-G: +10. R-B: +8. G-R: -12. G-B: -9. B-R: -5. B-G: -15.

Here are the files ready to load into you own FS7 or FS7II. Click on the link below to get to the download page where you can download a zip file with all of the scene files already in the correct folder structure to place on an SD card. Simply unzip the download and copy the “private” folder to the root of an empty SD card. These scene files have taken a lot of time and effort to develop. I offer them without charge for your own use. If you find them useful please consider buying me a coffee or other drink.


Type



pixel Scene files for the Sony PXW-FS7M2.

If you already have scen files on your own SD card then you can copy my files from either:

PRIVATE/SONY/PRO/CAMERA/PXW-FS7/

or

PRIVATE/SONY/PRO/CAMERA/PXW-FS7M2

To the same folder your own SD card. You can re-number the if you need to. Once the files are on an SD card insert the SD card in to the camera. Go to the “File” menu and “Scene File” and choose “Load from SD Card”.

FS7 – FS7M2 Scene Files

Want to know more – why not come to a workshop:

cameras, PXW-FS7, Workflow

Downloadable User Guides For The PXW-FS7 and FS7M2

2 Comments

quick-guide Downloadable User Guides For The PXW-FS7 and FS7M2

I was recently asked by Sony to write a user guide for the PXW-FS7 and FS7M2. Well it’s now complete and available for free download from Sony. The guide does not replace the manual but should act as a useful point of reference for those unfamiliar with the cameras. It should also help guide you through the use of the CineEI mode or change the various gammas settings in custom mode to suit different types of scene.

There are sections on exposure tools and controls, the variable ND filter, exposure tools and controls. Custom mode paint settings, Cine EI and LUT’s and additional information on the various shooting modes and functions.

There are two versions of the guide. One is an ePub book that can be displayed and read by may book reader programs such as iBooks and the other is an interactive PDF formatted for use on a mobile phone or tablet.

Both versions of the guide can be downloaded from the resources section this page on the Sony site..