Tag Archives: storage

FX6 Card Recording Times

How much can I fit on a SD card or CFExpress card is a question that comes up regularly. So I have prepared a table of the typical record times for most of the different codecs and frame rates for the ICME-FX6 camcorder. Do note that the times given are approximate and do not include proxies.  Not every frame rate and codec is included but you should be able to figure out the approximate record time for most cards, codecs and frame rates using this table.

The times for the codecs up to 60fps would also apply to the FX9 or any other Sony camera that uses the same codecs.

CODEC/FRAME RATE 32GB 64GB 80GB 128GB 256GB
UHD/4K XAVC-I 24/25p  16 32 40 64 128
UHD/4K XAVC-I 30p  13 26 33 53 106
UHD/4K XAVC-I 50p  8 15 19 31 62

UHD/4K XAVC-I 60p

6 13 15 26 52
UHD XAVC-I 100fps  4 7 10 15 30
UHD XAVC-I 120fps 3 6 8 12 24
UHD XAVC-L 24/25/30p 39 79 96 158 315
UHD XAVC-L 50/60p  8bit 26 51 63 103 206
UHD XAVC-L 24/25/30p 100fps S&Q 8 bit 10 19 24 39 78
UHD XAVC-L 50/60p 120fps S&Q 8 bit 8 16 20 32 64
UHD XAVC-L 50/60p 100fps  S&Q 8 bit 15 30 37 61 122
UHD XAVC-L 50/60p S&Q 120fps  8 bit 13 25 31 51 102
HD CODEC/FRAME RATE 32GB 64GB 80GB 128GB 256GB
HD XAVC-I 24/25/30p 34 67 83 135 270
HD XAVC-I 50/60p 17 35 43 70 140
HD XAVC-I 100fps 10 21 26 42 84
HD XAVC-I 120fps 8 17 21 35 70
HD XAVC-I 240fps (lower quality) 4 8 10 17 35
HD XAVC-L50 24/25/30p 75 150 180 300 600
HD XAVC-L50 50/60p 72 144 175 288 576
HD XAVC-L50 24/25/30p S&Q 120fps 36 72 88 144 288
HD XAVC-L50 50/60p S&Q 240fps 18 36 44 72 124
HD XAVC-L30 24/25/30p 101 201 250 405 810
HD XAVC-L30 50/60p  96 193 237 387 774
HD XAVC-L30 120fps  48 96 118 193 387
HD XAVC-L30 240fps 24 48 59 96 193

Look after Your Batteries In Lockdown.

I received this timely reminder from the guys at Pag Batteries and it contains important information even if you don’t have one of Pag’s excellent batteries. The main one being that you should not store lithium batteries full charged.

2074787f-47de-45d3-9ece-3b97aee4f155 Look after Your Batteries In Lockdown.

If you are currently unable to work as a result of the global pandemic, then you need to make sure that your Li-Ion camera batteries are in good health when it becomes possible to return to work.
 
Batteries naturally self-discharge over time. If their state-of-charge is less than 10% before an extended period of inactivity, they could become difficult for you to recover.
 
It is also undesirable for batteries to be 100% charged for storage as this can damage the cells and lead to a shorter overall life.
 
PAG recommends that you charge your Li-Ion batteries to 50% (anywhere between 20% and 80% is desirable) prior to long term storage of more than 2 weeks. PAGlink batteries should also be in an unlinked state during this period.
 
 
PAGlink Sleep Mode for Storage
 
PAGlink Batteries can be put into Sleep Mode for long term storage, using the battery display menu system. It shuts down the internal electronics and greatly reduces battery self-discharge. The battery can be woken-up with 2 presses of the display button.
 
Please refer to Section 6 of the User Guide for PAGlink Batteries via the links below:
 
 
 
PAGlink Gold Mount Batteries have an automatic sleep mode feature that initiates after 2 weeks of inactivity.
 
To maintain good battery capacity, it is beneficial to cycle batteries every 6 weeks (discharge followed by a full-charge).
 
If you have any queries regarding your PAG batteries, Sleep Mode and storage then please contact support via email: support@paguk.com
 
 
PAG would like to wish you all good health and a safe return to work when that day finally arrives.
 
The PAG team.