It’s that time of year again where for those of us that live in the more northern parts of Northern Hemisphere the weather really starts to turn cold. So, once again I have updated my guide to filming in the cold which can be found by clicking here.
I will be off to Norway again in January to shoot the Northern lights, something I do every lear and over the years I’ve worked in temperatures down to -45c.
A couple of years ago I wrote a guide to help people that might have to shoot in the cold. I’ve recently updated this article and as I know many of you won’t have seen it before I’ve provided a link to the page below
LINK: This article deals with shooting in the cold and how that might effect your camera.
LINK: Some ideas and suggestions for clothing in very cold conditions.
Here also are some tips for shooting snow scenes with conventional gammas. Of course you can also shoot with log or raw, if you do just make sure your exposure is nice and bright for the best results, generally when there is a lot of snow around dynamic range isn’t a huge problem as the snow acts as a reflector to fill in a lot of shadows.
With conventional gammas such as Rec-709 exposing for snow is tricky. You want it to look bright, but you don’t want to overexpose and it’s very easy to end up with a lot of the bright snow in your scene up in the knee or highlights where it will be compressed and loose contrast. This makes the snow look odd as it will have no texture, it can all too easily look over exposed when in fact it is not. In reality, although we often think of snow as bright and white, often you really don’t want to expose it too high. With Rec-709 if your camera has a high level zebra set them to 90% (Zebra 2 on most Sony cameras). This way you will get a zebra pattern on the snow as it starts to enter the compressed knee or highlight area. If you are using Sony’s cinegammas or hypergammas I would lower the highlight zebras to 80% -85%.
On overcast or flat light snow days I prefer not to use Hypergammas/Cinegammas as the highlight roll off can make the snow look very flat unless you grade the images a little and boost the contrast in post. However on bright higher contrast snow days with clear skies and strong shadows the Hyoegammas/Cinegammas work very well. You may want to consider using a little bit of negative black gamma to put a bit more contrast into the image.
You also want your snow to look white, so do a manual white balance using a proper white card or better still a grey card. Don’t try to white balance off the snow itself as snow can reflect a lot of blue light and skew the white balance a bit. If you are shooting during golden hour at the beginning or end of the day and want to retain that warm look you might want to use a 5600K preset rather than a manual white balance to capture either the golden hour light or the blue light that follows it.
If the overall scene is very bright you may need to watch your aperture. In most cases you don’t want to have the camera stopped down to an aperture of f11 or smaller. Due to an effect called diffraction limiting, in HD, at f11 a 2/3″ camera will start to show a slightly soft image. A 1/2″ sensor camera will be just starting to get slightly soft at f8. In 4K/UHD a super 35mm camera will start to show a slightly softer image from f11 – f16. So use you ND filters to control you light levels so you do not have too small an aperture. You may need to add additional ND in very bright scenes to avoid diffraction limiting.
One last tip. If you are standing around in the cold and get cold feet you should find something to stand on. Small twigs and branches, a rubber car mat anything like that will help insulate your feet from the cold ground helping keep them warm.
(Updated 12/2023)
With winter well upon us I thought it would be good to share some of my arctic shooting experience. I’ve shot in temperatures down to -45c in the arctic in winter.
Overall modern tapeless cameras do OK in extreme cold. The most reliable cameras are generally larger solid state cameras. Larger cameras cool slower than small ones and larger cameras will hold on to heat generated internally better than small ones. Cameras and electronics with lots of cooling vents can sometimes also be troublesome as the vents allow them to cool more quickly. But cold is not necessarily going to be the biggest problem.
IMPORTANT NOTE: It is EXTREMELY dangerous to charge normal lithium batteries that are below freezing. Below freezing the lithium in the battery migrates to the anode of the battery cell. This cuase permanent damage to the battery shortening its life and if enough builds up around the anode it can short the battery out causing a sudden fire/explosion. Each time you charge a very cold lithium battery more lithium builds up. It is possible for a lithium battery that has been charged when very cold to suddenly burst into flames some weeks/months/years later if bumped or knocked causing the lithium build around the anode to shift. Always warm up any lithium batteries before attempting to charge them.
Condensation:
Condensation is the big deal breaker. When you take the very cold camera inside into a warm house/hotel/car/tent you will get condensation. If the camera is very cold this can then freeze on the body of camera including the glass of the lens. If there is condensation on the outside of the camera, there will almost certainly also be condensation inside the camera and this can kill your camera.
To prevent or at least reduce the condensation you can place the camera in a large ziplock or other sealed bag BEFORE taking it inside, take the camera inside in the bag. Then allow the camera to warm up to the ambient temperature before removing it from the bag. Peli cases are another option, but the large volume of the pelicase means there will be more moisture inside the case to condense and the insulating properties of the case mean that it could take many, many hours to warm up.
I don’t recommend storing a cold or damp camera in a Pelicase (or any other similar waterproof case) as there is nowhere for the moisture to go, so the camera will remain damp until the case is opened and everything dried out properly.
Rather than moving a camera repeatedly from outside to inside and repeatedly generating risky condensation you should consider leaving the camera outside. You can leave the camera outside provided it does not get below -30c. Below -30c you risk the LCD panel freezing and cracking. LCD panels freeze at between -30 to -40c. If you are using a camera in very cold conditions and you notice the edges of the LCD screen going blue or dark you should start thinking about warming up that LCD panel as it may be close to freezing.
LCD displays will become slow and sluggish to respond in the cold. Your pictures may look blurry and smeary because of this. It doesn’t affect the recording, only what you see on the LCD.
Very often in cold regions houses will have an unheated reception room or porch. This is a good place to store your camera rather than taking it inside into the warm. Repeatedly taking a camera from cold to warm without taking precautions against condensation will shorten the life of your camera.
If you can, leave the camera on between shots. The camera generates some heat internally and this will prevent many issues.
BATTERY LIFE:
Li-Ion batteries are effected by the cold but they are not nearly as bad as Nicads or NiMh batteries which are all but useless below freezing. li-Ion battery life gets reduced by between 25 and 50% depending on how cold it is and the quality of the battery (very cheap cells may have a higher water content which can freeze causing the cell to dramatically lose capacity and the ability to deliver power).
Down to about -10c there is only a very marginal loss of capacity. Down to -25c you will lose about 20%-30% below -25c the capacity will fall away further and it becomes impossible to use the full capacity of the battery.
Keep your spare batteries in a pocket inside your coat or jacket until you need them. After use let the battery warm up before you charge it if you can. Charging a very cold battery will reduce the lifespan of the battery and it won’t fully charge (see note above – DO NOT CHARGE a battery that is below freezing, it is very dangerous). One top tip for shooting outside for extended periods is to get a cool box. Get some chemical hand warmers or better still electric rechargeable handwarmers and place them in the cool box with your batteries to keep them warm. If you don’t have hand warmers you can also use a hot water bottle. Chemical hand warms typically use an iron powder mixed with salts. The heat comes from the iron rapidly rusting. This process needs moisture to work. A chemical handwarmer will work great in a pocket close to your body moisture but when it is very cold there isn’t enough moisture in the air for a chemical warmer to work when it is away from your body moisture. As a result chemical warmers inside camera covers or in a cool box might not actually produce any heat.
Watch your breath
If your lens has and snow or ice on it, don’t be tempted to breath or blow on the lens to blow the ice off. Do not to breath on the lens when cleaning it as your warm breath will condense on the cold glass and freeze. Also try to avoid breathing out close to the viewfinder. When it is very cold and if you are warm in your nice thick winter clothes even standing close to the camera can lead to frost and ice building up on it. Small amounts of sweat from your body will evaporate and this moisture will find its way to the camera, even if you are a few feet (1 or 2m) from it. If doing a timelapse of the Northern Lights, once the camera is running you should move away from the camera.
A small soft paint brush is good for keeping your lens clean as in very cold conditions you’ll simply be able to brush and snow or ice off. Otherwise a large lens cloth.
Your lens will get cold and in some conditions you will get frost on the front element. To help combat this wrap some insulating fabric around the body of the lens. Wrist sweat bands are quite good for this or an old sock with the toes cut off. For time-lapse long sessions in very cold weather you might want to get a lens heater for the lens. These are normally 12 volt or USB powered and wrap around the lens. They don’t use lots of power but they do warm the lens just enough to keep the worst of the condensation, dew and frost off the lens. They are sometimes also called “dew heaters” and are sold by most good telescope suppliers.
Covers.
Conventional plastic rain covers become brittle below about -15c and can even shatter like glass below -20c. The clear plastic panels in other covers can also suffer the same fate. So use if you use a cover use one made out of fabric. Special insulated cold weather covers often called “polar bears” can be used and these often have pockets inside for chemical heat packs (although when very cold these don’t work, use a USB hand warmer instead). These are well worth getting if you are going to be doing a lot of arctic shooting with a larger camera and will help keep the camera warm. But for very small cameras the bulk of a thick cover can make it almost impossible to use. As an alternative wrap the camera in a scarf or cut the sleeves of an old sweater to make a tube you can slide over the camera. If you have a sewing machine you could make a simple cover out of some fleece type material.
For DSLR’s and stills cameras a balaclava can be used to cover the camera body to provide some protection. However unheated covers don’t make a big difference when the camera is outside in very cold temperatures for extended periods unless it is always left turned on, eventually the cold will get to it.
Brittle Plastic.
Plastics get brittle at low temperatures so be very gentle with anything plastic, especially things made from very hard, cheap plastic. The plastic Sony use appears to be pretty tough even at low temps. Wires and cables may become as rigid as a steel rod. Be gentle, bend then too much and the insulation may split and the cable break. I try to avoid bending any cable once it has become very cold.
Other considerations are tripods. If outside in very low temps for more than 30mins or so the grease in the tripod will become very thick and may even freeze, so your fluid damping will become either very stiff or freeze up all together. Contact your tripod manufacturer to see what temperatures their greases can be used over. Vinten and some of the other tripod companies can winterise the tripod and replace the normal grease with arctic grease. If you are unsure put your tripod head in your deep freeze at home for a few hours and see if it still works when you take it out.
Looking after yourself.
I find that the best way to operate the camera is by wearing a pair of large top quality mittens (gloves are next to useless below -15c), Consider getting a pair of Army surplus arctic mittens, they are very cheap on ebay and from surplus stores and will normally have an additional “trigger finger”. This extra finger makes it easier to press the record button and things like that. If you can get Swedish or Finnish military winter mittens, these are amongst the best. I wear a pair of thin “thinsulate” fleece gloves that will fit inside the mittens, i can then slip my hands in and out of the mittens to operate the camera. If you can get gloves with finger tips compatible with touch screens this will allow you to use any touch functions on a camera or your phone. Get extra large mittens, then it is easier to slip your hand in and out.
I keep a chemical hand warmer inside the mittens to warm my fingers back up after using the camera (or use heated mittens powered by a USB battery pack).
The hardest thing to keep warm is your feet. If you’ll be standing in snow or standing on ice then conventional hiking boots etc will not keep your feet warm. A Scandinavian trick if standing outside for long periods is to get some small twigs and tree branches to stand on and help insulate your feet from the cold ground. If your feet get cold then you are at risk of frostbite or frost nip. Invest in or hire some decent snow boots like Baffin’s. There is almost nothing worse than having ice cold feet when working. Don’t forget that if you do get cold, moving around, running on the spot etc will help get your circulation going and help you to warm up. Also consider some high energy food and snacks, you will burn a lot more calories in the cold than you would do normally. Also a flask with a hot drink is always welcome. I have an arctic clothing guide here; Arctic Clothing Guide |
I’m planning on running a Documentary production workshop and 3D workshop based on a Storm Chasing trip to the USA from the 4th to the 12th of June. The trip would be an excellent chance to really put your documentary skills in to practice and learn more about your cameras and workflow shooting a short film about the violent weather that hits Tornado Alley every spring. We can even shoot in 3D if that’s what people are interested in. I can provide a PMW-F3, lens kit and EX1R, but hopefully you would bring your own cameras and I can teach you how to get the most out of them. depending on the weather each day there would be a classroom session or practical on location session covering everything from sound and interview techniques, to camera setup and shooting tips. Will will do a lot of timelapse, make use of cache record (if you have it) and work in some very challenging lighting situations. Each member of the group will be given different roles to play as part of the “crew” each day so that they may gain a better understanding of the difficulties of each role. At the same time the idea is that each person will also create their own personal short film about our storm chasing adventure. With luck we should see incredible thunderstorms, giant hail and maybe even a tornado or two (I’ve been storm chasing for 12 years, it’s my speciality). The cost for this comprehensive and very exciting workshop will be $1800 USD per person for a place on the course. In addition to that each student will be responsible for their overnight accommodation. Typically we will stay in hotels/motels that cost approx $100 USD per night, so you should budget for approx $800 for accommodation bringing the total to $2600. We will depart from Denver, Colorado so you will have make your own travel arrangements to/from Denver. This will be a real educational adventure. The previous trips I have run to Norway for the Northern lights, Arizona for lightning and Tornado Chasing have been great successes with many people returning for more. We will spend a lot of time on the road, visiting many parts of the Mid-West. It will be fun and you should come away with improved video skills, a great short film, and amazing stories of adventure and excitement. Please use the contact form if your interested. Places are limited.
Well winter is upon us. The north of the UK is seeing some pretty heavy snow fall and it’s due to spread south through the week. I regularly make trips to Norway and Iceland in the winter to shoot the Northern Lights (email me if you want to come) so I am used to shooting in the snow. It can be very difficult. Not only do you have to deal with the cold but also difficult exposure.
First off it’s vital to protect your equipment and investment from the cold weather. A good camera cover is essential, I use Kata covers on my cameras. If you don’t have a proper cover at the very least use a bin liner or other bag to wrap up your camera. If you have a sewing machine you could always use some fleece or waterproof material to make your own cover. If snow is actually falling, it will end up on your lens and probably melt. Most regular lens cloths just smear any water around the lens, leaving you with a blurred image. I find that the best cloth to use in wet conditions is a chamois (shammy) leather. Normally available in car accessory shops these are soft, absorbent leather cloths. Buy a large one, cut it into a couple of smaller pieces, then give it a good wash and you have a couple of excellent lens cloths that will work when wet and won’t damage your lens.
Exposing for snow is tricky. You want it to look bright, but you don’t want to overexpose. If your camera has zebras set them to 95 to 100%. This way you will get a zebra pattern on the snow as it starts to over expose. You also want your snow to look white, so do a manual white balance using clean snow as your white. Don’t however do this at dawn or near sunset as this will remove the orange light normally found at the ends of the day. In these cases it is best to use preset white set to around 5,600k. Don’t use cinegammas or hypergammas with bright snow scenes. They are OK for dull or overcast days, provided you do some grading in post, but on bright days because large areas of your snow scene will be up over 70 to 80% exposure you will end up with a very flat looking image as your snow will be in the compressed part of the exposure curve. You may want to consider using a little bit of negative black gamma to put a bit more contrast into the image.
If the sun is shining, yes I know this may not happen often in the UK, but if it is then the overall brightness of your scene may be very high. Remember to try to avoid stopping down your lens with the iris too far. With 1/3? sensor cameras you should aim to stay more open than f5.6, with 1/2? more than f8 and 2/3? more than f11. You may need to use the cameras built in ND filters or external ND filters to achieve this. Perhaps even a variable ND like the Genus ND Fader. You need to do this to avoid diffraction limiting, which softens the image if the iris is stopped down too much and is particulary noticeable with HD camcorders.
Finally at the end of your day of shooting remember that your camera will be cold. If you take it in to a warm environment (car, house, office) condensation will form both on the outside and on the inside. This moisture can damage the delicate electronics in a camcorder so leave the camera turned off until it has warmed up and ensure it is completely dry before packing it away. This is particularly important if you store your camera in any kind of waterproof case as moisture may remain trapped inside the case leading to long term damage. It is a good idea to keep sachets of silica gel in your camera case to absorb any such moisture. In the arctic and very cold environments the condensation may freeze covering the camera in ice and making it un-useable. In these extreme situations sometimes it is better to leave the camera in the cold rather than repeatedly warming it up and cooling it down.
Have fun, don’t get too cold, oh… and keep some chemical hand warmers handy to help stop the lens fogging and to keep your fingers from freezing.
