EX1 - EX3 picture profiles.

Discuss all aspects of the EX series camcorders here.
Post Reply
alisterchapman
Site Admin
Posts: 431
Joined: February 1st, 2011, 7:43 pm

EX1 - EX3 picture profiles.

Post by alisterchapman » June 1st, 2011, 8:23 pm

These are the picture profiles that I am currently tending to favour for the EX1, EX1R and EX3. Please remember that picture profiles are entirely subjective. These settings work for me, that doesn’t mean they are perfect or for everyone. I like the images the cameras produce when I use these profiles. Please feel free to adapt them or modify them any way you choose. They work on any of the current EX cameras.

Vivid – Designed to help match the EX to a PDW-700. Gives vivid colours with a small shift away from yellow.

Matrix – Cinema, Matrix Level +60

R-G +8, R-B +10, G-R 0, G-B +15, B-R +5, B-G +6

Detail Level -10 Frequency +20, Crispening -40 (if using gain use crispening +14)

Gamma Cinegamma 1

Black level -3, Black Gamma -35

Low Key Saturation -10

Natural C4 – Designed to give a neutral, natural looking image.

Matrix – Cinema, Matrix Level +35

Detail level -7, Frequency +30, Crispening -40 (if using gain use crispening +20)

Black Level -3, Low key Saturation -15

AC Punch – Gives a very high contrast, bold look.

Matric – Cinema, level +40

Gamma Standard 2, Knee level 80, Slope 0

R-G 0, R-B +1, G-R +12, G-B +2, B-R +11, B-G 0

Detail Level -10, Frequency +30, Crispening -45

Black Level -4, Black Gamma -20.

AC Good to Grade – a general purpose setup to give good grading possibilities.

Matrix – Cinema, Level +25

Gamma Cinegamma 1 (Do not use -3db gain)

Detail Level -7, Frequency +45, Crispening -45 (use +35 if using gain)

Black Level -3.

AC-SD Camera look. To mimic an older SD camcorder based on a DSR400, good for HD to SD conversion.

Matrix – Cinema, Level +15

Detail Level +20, Detail Frequency -35, White Limit +35, Black limit +45

Knee, Manual, Level 90, Slope 0.

Gamma Standard 2, Gamma Level +5

Black Gamma -10

Black Level -10
Post Reply