Video signal (waveform) "cannot proceed" on FS7

Discuss the PMW-F3 and any other F series camcorders here
Post Reply
cornerstore
Posts: 2
Joined: August 5th, 2013, 9:26 am

Video signal (waveform) "cannot proceed" on FS7

Post by cornerstore » January 12th, 2015, 4:25 am

Hi there. Just got my new FS7. Loving the EI mode particularly with my sigma 18-35 and metabones adapter. Looks fabulous in first couple of test shots!

The question I have is about the video signal monitor/indicator. I have the sigma lens and the sony18015G lens. I cant get the video signal monitor to work with either of them. Just says "cannot proceed". Is this function only usable with the new beaut 28135 lens?

Thanks in advance!

Jamie
cornerstore
Posts: 2
Joined: August 5th, 2013, 9:26 am

Re: Video signal (waveform) "cannot proceed" on FS7

Post by cornerstore » January 12th, 2015, 1:13 pm

To answer my own question I've discovered the camera needs its firmware upgraded to 1.10. Should fix problem I'm hoping!
Post Reply