XDCAM-USER.COM

Alister,
Really like the Hyperdeck Shuttle... running out of SDI port A 1.5g Slog/4:2:2... however, when I try to record 720p60 or 1080 59.94i the Hyperdeck records (2) images stacked on top of one another. Blackmagic Design says both formats are supported by the Shuttle. Do I have to use a dual link recorder to get this to work correctly?

Understand if you are not familiar with the Shuttle... just thought you might have some insight.

This is because the F3 outputs full Dual Link 1920x1080 60P from the A and B ports combined in these modes. If the F3 is set to 50i or 60i then the A/B output is either dual link 50/60p or 3G 50/60P.

The SDi Out will give a 720p50 or 720p60 output when the cameras is set to 720p, but not the A or B SDi's.