Tag Archives: auto

FX6, PXW-FS7, PXW-FX9

Using Auto Exposure With Cine EI.

1 Comment


First – What is “Exposure”

Something I find useful to consider is that “Exposure” is the amount of light that you put onto the sensor or film stock in your camera. It isn’t brightness, it is how much light. If you think about it, if you use a light meter to find you exposure settings, the light meter has no idea how bright the pictures will be, all it does is give you the shutter and aperture values needed to put the correct amount of light onto the sensor or film stock.

How Cine EI Works.

Next we need to think about how Cine EI works. You have to remember that when shooting using Cine EI the only thing that changes when you change the EI value is the brightness of the LUT and it is also worth considering that different LUTs may be completely different brightness. There is no change to the sensitivity of the sensor and no direct change to the brightness of what is recorded. To change the brightness of what is recorded YOU must change the aperture, shutter speed or ND etc. Normally you would monitor your images via a LUT and then you must adjust the exposure so the image on the viewfinder looks correct at the new Exposure Index, or use the waveform to measure the LUT and use this to set the exposure for the new EI. And by changing the exposure you are adding an exposure offset putting more (or less) light on to the sensor than would be normal at the base EI.

AE In Cine EI.

If you wish to use auto exposure in the Cine EI mode then you need to understand that the camera’s auto exposure system measures what is being recorded. It does not measure the LUT levels. The auto exposure system is unaware of your desire to expose the sensor more or less brightly than normal and will always base the exposure on the base ISO, not the Exposure Index. As a result if you are using AE and you go from 800 EI to 400 EI the image seen via the internal LUT will get darker by one stop, the AE will NOT compensate for the lower EI.  If you were to manually brighten the exposure by one stop the cameras exposure meter will think you are now over exposed – because you are!


Adding Offsets.

The only way around this is to add an offset to the AE system to account for the offset added by the different Exposure Index. For example if you want to shoot at 400EI (The LUT becoming 1 stop DARKER) then you would need to add a +1.0 stop offset to the cameras AE settings to offset the exposure 1 stop brighter. Each time you halve the EI you should add an extra +1 stop of offset. Each time you double the EI you should include an extra -1 stop offset.

There are a couple of ways to do this but the quickest is to use the Quick Menu function that is by default assigned to button 5 on the hand grip or button 8 on the handle. Press the direct menu button and then use the thumbstick to go the AE+0 indication just above the shutter speed indicator and add your offset.

Or you can long press the menu button to go into the cameras main menu then go to the – Shooting – Auto Exposure page and add your offset to the Level setting.

I don’t recommend the use of Auto Exposure in Cine EI. For a start AE uses the average brightness of the scene to set the exposure level, often this isn’t appropriate for Log. When shooting with log generally you want to ensure that it is your mid range is exposed at the right level and you don’t want bright highlights to result in an under exposed mid range. Additionally if the exposure changes mid shot this can make grading very difficult. If you do use auto exposure in Cine EI, then as well as adding any necessary offsets I also recommend slowing down the responsiveness of the AE using the “Speed” setting in the Auto Exposure menu. Using a value such as -60 will slow down the rate at which the AE will change the exposure which helps avoid rapid auto exposure changes for momentary light changes within the scene.

It is really important to remember that Exposure is NOT brightness. Exposure is how much light you put on the sensor. A light meter doesn’t know how bright you want your pictures to be. All it knows is the correct amount of light to put on to the sensor for the “correct” exposure. If using an external light meter provided you put the right values into your light meter it will give you the correct exposure settings, even though it has no idea how bright your pictures will be and the camera’s internal exposure meter acts in a similar way, so offsets are needed to match each EI you use.

300x250-ad-box1 Using Auto Exposure With Cine EI.
cameras, cinematography, PMW-F55, PXW-FS5, PXW-FS7

Auto Knee when shooting with Rec-709.

7 Comments

Like many cameras the Sony PXW-FS7, PMW-F5 and F55 use an automatic knee circuit to help the camera handle strong highlights or overexposure when shooting using standard gamma curves such as Rec-709 (STD gamma 5). On some ENG cameras there is a very similar function  called DCC (Dynamic Contrast Compensation) which is often selected via the Camera/Bars switch.

On the FS7, F5/F55 and many others the Auto Knee is on by default out of the factory. It can be turned on and off in the cameras paint settings. In most normal shooting situations, if you are correctly exposed the auto knee does a good job of bringing bright highlights down out of clipping.  The auto knee threshold is at around 90% brightness. Expose with objects brighter than 90% in your scene and the auto knee starts to kick in.

The correct exposure for white, such as a 90% reflectivity white card or white piece of paper in Rec-709 is 90%. Skin tones, plants, walls, roads and in fact most objects will normally be below white or below 90%. However direct light sources, such as the sky or direct reflections such as shiny car body work will be brighter than white. So the knee should only ever effect objects brighter than white if you are exposed correctly.  So for most situations it should not effect skin tones and the majority of the scene, just the bright highlights.

The auto knee detects highlight levels above 90% and tries to keep the highlight range below clipping by adding contrast compression to the highlights. The amount of compression depends on how strong the highlights are. As a result the auto knee effect will vary with exposure. If you have a scene with only a few highlights there will be some knee compression and it’s effect will only be seen above approx 90%. If you then open the aperture or have a lot of highlights the auto knee will increase the highlight compression to compensate. If the highlight range becomes very large then the knee will not only increase the amount of compression but also lower the knee point so more and more of the upper exposure range is effected by the knee. In extreme cases the knee point may get as low as 70-80% and this then starts to effect skin tones.

To prevent rapid fluctuations of the contrast in the highlight range the auto knee has a slight delay. This can result in a vicious circle where you open the iris a bit to help brighten the shot. The shot gets brighter. Then a couple of seconds later you look at the shot again and because the knee has now adjusted the highlights after it’s delay period it looks different to how it looked at the moment you made the initial adjustment. So you adjust again…. then the knee adjusts again and so on. Sometimes this lag can make it tricky to get your highlights to look exactly how you want.

Another common auto knee effect is to see the brighter parts of an entire image change as a result of a change in only a small part of the scene. A typical example would be an interview with a window in the background. As the highlight level in the bright window changes, perhaps as the sun comes and goes from behind passing clouds, the knee tries to compensate and all of the highlights in the scene go up and down in brightness whether they are over exposed or not. This looks very strange and can ruin an otherwise good looking shot.

If you are shooting in a studio against a white background the auto knee makes it impossible to get a brilliantly bright uniformly clipped white background. You increase your exposure to make the white background extra bright and because that white is now above 90% the auto knee treats it as a highlight and tries to control it’s brightness. The more you open the aperture the more the knee pulls down the white background, it never reaches clipping. Eventually you get to the point where the knee starts to effect the skin tones but your white backdrop still isn’t clipped. The image doesn’t look great.

In these cases the best thing to do is to turn off the Auto Knee. If you go into the paint settings you will find the knee settings. In most cases leave the knee on (except perhaps for the white studio example), but turn OFF the auto knee function. The fixed level knee will still give you a good highlight range but eliminate the pumping or other variable knee effects. Note that the knee options have no effect if using a Hypergamma or log. They only come into paly with standard gamma.