Tag Archives: frame

What’s So Magical About Full Frame – Or Is It all Just ANOTHER INTERNET MYTH?

FIRST THINGS FIRST:
The only way to change the perspective of a shot is to change the position of the camera relative to the subject or scene.  Just put a 1.5x wider lens on a s35camera and you have exactly the same angle of view as a Full Frame camera. It is an internet myth that Full Frame changes the perspective or the appearance of the image in a way that cannot be exactly replicated with other sensor or frame sizes. The only thing that changes perspective is how far you are from the subject. It’s one of those laws of physics and optics that can’t be broken. The only way to see more or less around an object is by changing your physical position.

The only thing changing the focal length or sensor size changes is magnification and you can change the magnification either by changing sensor size or focal length and the effect is exactly the same either way. So in terms of perspective, angle of view or field of view an 18mm s35 setup will produce an identical image to a 27mm FF setup. The only difference may be in DoF depending on the aperture where  f4 on FF will provide the same DoF as f2.8 on s35. If both lenses are f4 then the FF image will have a shallower DoF.

Again though physics play a part here as if you want to get that shallower DoF from a FF camera then the lens FF lens will normally need to have the same aperture as the s35 lens. To do that the elements in the FF lens need to be bigger to gather twice as much light so that it can put the same amount of light as the s35 lens across the twice as large surface area of the FF sensor.  So generally you will pay more for a comparable FF like for like aperture lens as a s35 lens. Or you simply won’t be able to get an equivalent in FF because the optical design becomes too complex, too big, too heavy or too costly.
This in particular is a big issue for parfocal zooms. At FF and larger imager sizes they can be fast or have a big zoom range, but to do both is very, very hard and typically requires some very exotic glass. You won’t see anything like the affordable super 35mm Fujinon MK’s in full frame, certainly not at anywhere near the same price. This is why for decades 2/3″ sensors and 16mm film before that, ruled the roost for TV news as lenses with big zoom ranges and large fast apertures were relatively affordable.
Perhaps one of the commonest complaints I see today with larger sensors is “why can’t I find an affordable fast, parfocal zoom with more than a 4x zoom range”. Such lenses do exist, for s35 you have lenses like the $22K Canon CN7 17-120mm  T2.9, which is pretty big and pretty heavy. For Full Frame the nearest equivalent is the more expensive $40K Fujinon Premista 28-100 t2.9. which is a really big lens weighing in at almost 4kg. But look at the numbers: Both will give a very similar AoV on their respective sensors at the wide end but the much cheaper Canon has a greatly extended zoom range and will get a tighter shot than the Premista at the long end. Yes, the DoF will be shallower with the Premista, but you are paying almost double, it is a significantly heavier lens and it has a much reduced zoom ratio. So you may need both the $40K Premista 28-100 and the $40K Premista 80-250 to cover everything the Canon does (and a bit more). So as you can see, getting that extra shallow DoF may be very costly. And it’s not so much about the sensor, but more about the lens.
The History of large formats:
It is worth considering that back in the 50’s and 60’s we had VistaVision, a horizontal 35mm format the equivalent of 35mm FF, plus 65mm and a number of other larger than s35 formats. All in an effort to get better image quality.
VistaVision (The closet equivalent to 35mm Full Frame).
VistaVision didn’t last long, about 7 or 8 years because better quality film stocks meant that similar image quality could be obtained from regular s35mm film and shooting VistaVision was difficult due to the very shallow DoF and focus challenges, plus it was twice the cost of regular 35mm film. It did make a brief comeback in the 70’s for shooting special effects sequences where very high resolutions were needed. VistaVision was superseded by Cinemascope which uses 2x Anamorphic lenses and conventional vertical super 35mm film and Cinemascope was subsequently largely replaced by 35mm Panavision (the two being virtually the same thing and often used interchangeably).
65mm formats.
 At around the same time there were various 65mm (with 70mm projection) formats including Super Panavision, Ultra Panavision and Todd-AO These too struggled and very few films were made using 65mm film after the end of the 60’s. There was a brief resurgence in the 80’s and again recently there have been a few films, but production difficulties and cost has meant they tend to be niche productions.
Historically there have been many attempts to establish mainstream  larger than s35 formats. But by and large audiences couldn’t tell the difference and even if they did they wouldn’t pay extra for them. Obviously today the cost implication is tiny compared to the extra cost of 65mm film or VistaVision. But the bottom line remains that normally the audience won’t actually be able to see any difference, because in reality there isn’t one, other than perhaps a marginal resolution increase. But it is harder to shoot FF than s35. Comparable lenses are more expensive, lens choices more limited, focus is more challenging at longer focal lengths or large apertures. If you get carried away with too large an aperture you get miniaturisation and cardboarding effects if you are not careful (these can occur with s35 too).
Can The Audience Tell – Does The Audience Care?
Cinema audiences have not been complaining that the DoF isn’t shallow enough, or that the resolution isn’t high enough (Arri’s success has proved that resolution is a minor image quality factor). But they are noticing focus issues, especially in 4K theaters.
 So while FF and the other larger format are here to stay. Full Frame is not the be-all and end-all. Many, many people believe that FF has some kind of magic that makes the images different to smaller formats because they “read it on the internet so it must be true”.  I think sometimes some things read on the internet create a placebo effect where when you read it enough times you will actually become convinced that the images are different, even when in fact they are not. Once they realise that actually it isn’t different, I’m quite sure many will return to s35 because that does seem to be the sweet spot where DoF and focus is manageable and IQ is plenty good enough. Only time will tell, but history suggest s35 isn’t going anywhere any time soon.

Today’s modern cameras give us the choice to shoot either FF or s35. Either can result in an identical image, it’s only a matter of aperture and focal length. So pick the one that you feel most comfortable with for you production. FF is nice, but it isn’t magic.

Really it’s all about the lens.

The really important thing is your lens choice. I believe that what most people put down as “the full frame effect” is nothing to do with the sensor size but the qualities of the lenses they are using. Full frame stills cameras have been around for a long time and as a result there is a huge range of very high quality glass to choose from (as well as cheaper budget lenses). In the photography world APS-C which is similar to super 35mm movie film has always been considered a lower cost or budget option and many of the lenses designed for APS-C have been built down to a price rather than up in quality. This makes a difference to the way the images may look. So often Full Frame lenses may offer better quality or a more pleasing look, just because the glass is better.

I recently shot a project using Sony’s Venice camera over 2 different shoots. For the shoot we used Full Frame and the Sigma Cine Primes. The images we got looked amazing. But then the second shoot where we needed at times to use higher frame rates we shot using super 35 with a mix of the Fujinon MK zooms and Sony G-Master lenses. Again the images looked amazing and the client and the end audience really can’t tell the footage from the first shoot with the footage from the second shoot.

Downsampling from 6K.

One very real benefit shooting 6K full frame does bring, with both the FX9 and Sony Venice (or any other 6K FF camera) is that when you shoot at 6K and downsample to 4K you will have a higher resolution image with better colour and in most cases lower noise than if you started at 4K. This is because the bayer sensors that all the current large sensor camera use don’t resolve 4K when shooting at 4K. To get 4K you need to start with 6K.

More on frame rate choices for todays video productions.

This is another of those frequent questions at workshops and online.
What frame rate is the best one to use?
First – there is no one “best” frame rate. It really depends on how you want your video to look. Do you want the slightly juddery motion of a feature film or do you want silky smooth motion?
You also need to think about and understand how your video will be viewed. Is it going to be watched on a modern TV set or will it be watched on a computer? Will it only be watched in one country or region or will it be viewed globally?
Here are some things to consider:
TV in Europe is normally 50Hz, either 25p or 50i.
TV in the North America is 60Hz, either 30p or 60i (both actually 29.97fps).
The majority of computer screens run at 60Hz.
Interlaced footage looks bad on most LCD screens.
Low frame rates like 24p and 25p often exhibit judder.
Most newer, mid price and above TV’s use motion estimation techniques to eliminate judder in low frame rate footage.
If you upload 23.98fps footage to YouTube and it is then viewed on a computer it will most likely be shown at 24p as you can’t show 0.98 of a frame on a 60Hz computer screen.
Lets look first at 25p, 50i and 50p.
If you live in Europe or another 50Hz/Pal area these are going to be frame rates you will be familiar with. But are they the only frame rates you should use? If you are doing a broadcast TV production then there is a high chance that you will need to use one of these standards (please consult whoever you are shooting for). But if your audience is going to watch your content online on a computer screen, tablet or mobile phone these are not good frame rates to use.

Most computer screens run at 60Hz and very often this rate can’t be changed. 25p shown on most computer screens requires 15 frames to be shown twice and 10 frames to be shown 3 times to create a total of 60 frames every second. This creates an uneven cadence and it’s not something you can control as the actual structure of the cadence depends on the video subsystem of the computer the end user is using.

The odd 25p cadence is most noticeable on smooth pans and tilts where the pan speed will appear to jump slightly as the cadence flips between the 10 frame x3 and 15 frame x 2 segments. This often makes what would otherwise be smooth motion appear to stutter unevenly. 24p material doesn’t exhibit this same uneven stutter (see the 24p section). 50p material will exhibit a similar stutter as again the number of padding frames needed is uneven, although the motion should be a bit more fluid.
So really 25p and 50p are best reserved for material that will only ever be seen on televisions that are running at 50Hz. They are not the best choices for online distribution or viewing on computers etc.
24p, 30p or 60p (23.98p, 29.97p)
If you are doing a broadcast TV show in an NTSC/60Hz area then you will most likely need to use the slightly odd frame rates of 23.98fps or 29.97fps. These are legacy frame rates specifically for broadcast TV. The odd frame rates came about to avoid problems with the color signal interfering with the luma (brightness) signal in the early days of analog color TV.
If you show 23.98fps or 29.97fps footage on a computer it will normally be shown at the equivalent of 24p or 30p  to fit with the 60Hz refresh rate of the computer screen. In most cases no one will ever notice any difference.
24p Cadence.
23.98p and 24p when shown on a 60Hz screen are shown by using 2:3 cadence where the first frame is shown twice, the next 3 times, then 2, then 3 and so on. This is very similar to the way any other movie or feature film is shown on TV and it doesn’t look too bad.
30p or 29.97p footage will look smoother than 24p as all you need to do is show each frame twice to get to 60Hz there is no odd cadence and the slightly higher frame rate will exhibit a little less judder. 60p will be very smooth and is a really good choice for sports or other fast action. But, higher frame rates do require higher data rates to maintain the same image quality. This means larger files and possibly slower downloads and must be considered. 30p is a reasonable middle ground choice for a lot of productions, not as juddery as 24p but not as smooth as 60p.
24p or 23.98p for “The Film Look”.
Generally if you want to mimic the look of a feature film then you might choose to use 23.98p or 24p as films are normally shot at 24fps. If your video is only going to be viewed online then 24p is a good choice. If your footage might get shown on TV the 23.98p may be the better choice as 23.98fps works well on 29.97fps TV’s in 60Hz/NTSC areas.
BUT THERE IS A NEW CATCH!!!
A lot of modern, new TV’s feature motion compensation processes designed to eliminate judder. You might see things in the TV’s literature such as “100 Hz smooth motion” or similar.  If this function is enabled in the TV it will take any low frame rate footage such as 24p or 25p and use software to create new frames to increase the frame rate and smooth out any motion judder.
So if you want the motion judder typical of a 24fps movie and you create at 24fps video, you may find that the viewer never sees this juddery, film like motion as the TV will do it’s best to smooth it out! Meanwhile someone watching the same clip on a computer will see the judder. So the motion in the same clip will look quite different depending on how it’s viewed.
Most TV’s that have this feature will disable it it when the footage is 60p as 60p footage should look smooth anyway. So a trick you might want to consider is to shoot at 24p or 30p and then for the export file create a 60p file as this will typically cause the TV to turn off the motion estimation.
In summary, if you are doing a broadcast TV project you should use the frame rate specified by the broadcaster. But for projects that will be distributed via the internet I recommend the use of 23.98p or 24p for film style projects and 30p for most other projects. However if you want very smooth motion you should consider using 60p.

Motion “Judder” on the FS100 and other video cameras at low frame rates.

There have been a number of threads in various forums about the way the images from the new Sony FS100 appear to judder or stutter when shooting at 25P or 24P. Most of the complaints appear to be coming from PAL areas where shooting 25P is common. This is not an issue unique to the FS100, in fact motion judder is often more noticeable with video cameras than film cameras even though the frame rates and shutter speeds may be exactly the same. Why is this?

One of the key issues here and I believe a very strong clue to what is going on is that most complain that the issue is most pronounced in areas of high contrast.

Our visual system picks up edges and other areas of high contrast to detect motion, in areas of high contrast any non-smoothness of the images motion will be more noticeable. The higher the resolution/contrast or more precisely the higher the MTF of the camera system the more we will notice judder and stutter.  Just take fast motion in an Imax film as an example, it stutters like crazy.

The FS100 and similar high contrast/resolution cameras will appear to stutter at low frame rates more than a low contrast/low resolution camera. Edges in film are almost never instant changes from black to white, there is almost always some smoothing or dithering caused by the grain structure of film. So when you consider the FS100’s near complete lack of noise, which through it’s random nature will help mask judder and stutter and you have a worst case scenario. A camera with sharp edges and no noise.

Another strong contributing factor is the use of detail correction that adds a very definite, hard, non-motion blurred black or white edge around any areas of medium to high contrast, so unlike the very slightly dithered edges we would see in film we have instant light to dark or dark to light transitions occurring over a single pixel. In the case of a pan that hard edge is going to step uniformly from one position to the next, it won’t have any motion blur and it will increase edge contrast compounding the images judder as our visual system will notice these hard edges jumping from one place to the next.

The PMW-F3 although it uses the same sensor is less prone to this effect as it has a more sophisticated DSP and uses less detail correction and more aperture correction for image sharpening. Aperture correction blurs with motion as it is a type of high frequency boost and as you pan the camera the motion blur of the image reduces high frequencies so the amount of correction also drops thus helping smooth edges as you pan.

You also need to consider the results of watching 25fps video on a computer monitor typically running at 60hz. You will get judder as 25 does not go into 60 evenly, this helps explain why this “issue” is getting more airtime in Europe than in the US where 24P with pull up to 30P is common and of course 30P will display on a 60Hz monitor with no additional problems.

So in the case of the FS100 (or other cameras exhibiting this effect),  I would suggest turning off the detail correction circuits or at the very least reducing the detail level if you are shooting high contrast images or anything with a lot of motion. It would also be interesting to compare similar pans at different speeds with some gain added to see if that helps.

I don’t think this is, as claimed by some, to be camera fault, more likely a result of a very clean, detail corrected image. Even an EX1 or EX3 will do similar things if your detail settings are too high. It’s not unique to the FS100, just one of those things that can happen when you have sharp pictures. When I watched the Sony F65 4k demo film “The Arrival” I noticed a similar increase in motion judder compared to film, again I put this down to high edge sharpness catching my eye and making me notice the cameras motion more acutely. Ohh that F65 stuff looked stunning!

PMW-F3 Raw Footage.

Hi all. Grabed a few clips today with the PMW-F3. You can download the raw BPAV file by clicking here. half a dozen clips, each only a few seconds long, shot at 24p. 170Mb download.

As well as the video clips I have also pulled of a few full resolution frame grabs. Click on the images to see the full frame version.

Girl1-300x168 PMW-F3 Raw Footage.
PMW-F3 Girl frame grab
F3-Grab4-300x168 PMW-F3 Raw Footage.
PMW-F3 leaves frame grab
F3-Grab5-300x168 PMW-F3 Raw Footage.
PMW-F3 Owl frame grab