Camrade CB Single III Camera Bag.

I was asked by my good friend Rene of Camrade to take a look at some of their new products. So over the next couple of weeks I’ll be looking at the CB Single III camera bag, the PMW F3 rain cover and a new PL lens adapter for the Sony FS100. First I’m going to take a look at the camera bag.

bag1-300x224 Camrade CB Single III Camera Bag.
Camrade CB Single III

I’ve had Camrade bags before and they have always lasted well, standing up to the knocks and bumps that go along with lugging kit all over the place. I was in the market for a new bag for one of my PMW-F3’s, so I was sent the CB Single III bag. From the outside this is a functional looking bag with a large mesh pocket on one side and further external pockets on the other side and at one end. It has a nice well padded chunky carry strap that is comfortable to use.

bag2-300x224 Camrade CB Single III Camera Bag.
Inside the Camrade CB Single III

The top of the bag opens up with a dual zipper system that gives you completely un hindered access to the bags interior. This is great for run and gun where you may need to quickly grab the camera from the bag and you don’t want to have to squeeze it out through a small opening. The interior of the bag has various dividers that are secured by velcro, so you can customise the layout to suit your needs. One of the dividers forms a clever storage box to one side of the bag. I’ve found this particularly useful with the F3 as I can safely store my Genus 4×4 Matte Box and a couple of DSLR lenses in here.

bag3-e1312127885429-300x224 Camrade CB Single III Camera Bag.
Opening the storage compartment shows moveable dividers

Then my batteries, other bits and bobs and the rain cover fit comfortably in the end compartments. This bag really works well with the F3 alloying you to get a complete basic shooting kit into one bag without the bag being too big or bulky.

It’s not perhaps the most fancy or sophisticated of bags, but in terms of practicality and functionality it works very well indeed. There is a strap in the main compartment to hold the camera secure if your really going to be bouncing it around. The base and sides of the bag are all semi ridged and have a good layer of shock absorbing foam in them. With one of these bags typically costing a very affordable $200 it really does represent good value for money.

My thanks to Rene for the sample bag. http://www.camrade.com/products-page/video/cambags/cb-single-iii1

In my next post I’ll look at the nice rain cover that Camrade make for the F3.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.