Vinten Vision 100 Long Term Review.

advertise-here-275 Vinten Vision 100 Long Term Review.
IMG_0632-300x224 Vinten Vision 100 Long Term Review.
Vinten 100 Tripod Head

I’m a long time Vinten user. My first true, pro tripod was a Vinten 5 with alloy legs that I purchased in 1989 (I think). 22 years on I still have that tripod and it is still perfectly useable. Since then I’ve been the very happy owner of a fabulous set of Vinten FibreTec legs (still have them, still love them) and a new model Vinten Vision 5AS. All of these have been excellent, reliable and virtually indestructible. I’ve taken them up into the Arctic where it’s been -36c. I’ve taken them to the Arizona desert, into Hurricanes, Sand Storms and all kinds of extreme weather. I’ve even used them stood waist deep in the sea (not really recommended). Anyway, I’m waffling… When I needed a bigger tripod to support my Hurricane 3D rig I obtained a Vinten Vision 100.

The Vision 100 is not a new model, but it has a reputation for being able to take a quite remarkable payload for it’s size. You see the Vision 100 head is not much bigger or heavier than my Vinten 5, yet it can take double the payload (20kg). This means that I can still pack it in to my luggage when I’m travelling without getting crippled by high excess baggage charges.

IMG_0634-300x224 Vinten Vision 100 Long Term Review.
Vinten 100 Counter Balance Adjuster

One of the features that has made it particularly useful for 3D is the digital counterbalance readout that tells you exactly where you are within the heads very generous and continuously adjustable counter balance range. When swapping between the 3D rig and a conventional camera I can simply dial in the numbers that I know give me optimum balance and off I go. One minute I can have a 3D rig with a pair of F3 etc, weighing over 15kg, then after a few turns of the counterbalance knob I can mount just a single F3 weighing only 3kg and the tripod works beautifully well with either payload. The continuously adjustable drag adjustments for pan and tilt are easy to set and if you want you can get a lot of drag. I find this very useful when shooting air shows with long lenses as I like to have quite a bit of drag to work against to keep things smooth. The smoothness of this head is lovely with no sudden slips or tight spots, it’s a pleasure to use.

Alister-in-AZ-207x300 Vinten Vision 100 Long Term Review.
In the Arizona desert shooting thunderstorms

The legs I have been using with the Vision 100 head are the Vinten 3 stage carbon fibre Pozi-Loc legs. Even though these are nice and light, they are remarkably stiff. I also have one of Vinten’s clever  Spread Loc mid level spreaders. I first got one of these with my FibreTec legs and I’ve never looked back. You can lock the spreader at almost any spread position with a quick turn of the single locking knob. If you need to get the legs down low there is a little button on each arm of the spreader that allows the arm to extend to up to twice it’s original length. The end result is the ability to get very low, even when using standard legs.

Tripods are pretty boring things really. Not as glamourous as a camera, but an essential piece of kit anyway. Get the right tripod and it will last you many, many years, almost certainly out lasting those glamourous cameras. All the Vintens I have owned have been superb. The Vinten 100 is a solid, well made piece of kit that I don’t even really think about when I’m using it. And that is after all what you want, gear that just gets on with its job.

2 thoughts on “Vinten Vision 100 Long Term Review.”

  1. Just got my first set of Fiber Tecs a couple days ago…been waiting for them for
    Over a decade! Do you have any advice caring for them, Alister? I too am a nature shooter and am wondering if crap can get lodged between the leg locks and the leg’s wide, flat surface? I also know this unique design had some sort of flaw that prevented it from becoming the next big thing in tripod design. When not in use do you think it’s best to leave the 6 leg locks in unlocked position, thus relieving stress on the tightening mechanism? Have you found these legs to be fragile or tough? Do you treat your gear rough on the field or are you careful? Have you had any problems with the Fiber Tecs?

    You know, I’ve lots of questions here and am offering nothing back to you…at least for the moment. I hope you are well. We all appreciate your willingness to share your experiences. Have a great holiday season!

    Larry Arbanas

    1. I do try to look after my gear, but sometimes things do get bashed about. The Fibertecs are very tough. A wipe down with a damp cloth helps keep grit out of the channels. I’ve always kept my legs locked even when not in use. After 10 years they have only needed adjusting a couple of times. There is an allen head adjuster on each locking mechanism.

      The Fibertecs proved too costly to make at a competitive price which is why they were only made for a short period.

Leave a Reply

Your email address will not be published. Required fields are marked *

*