Tag Archives: limitations

PXW-FX9 Things that might trip you up.

Using the FX9 more and more in many different configurations I do every now and again come across things that can perhaps don’t work quite as expected. So I thought I would list them here and I will add to the list as I come across anything else.

 

When using an external recorder connected via HDMI: To remotely control the record function of the external recorder you have to enable the record control via HDMI in the Project Menu. But you ALSO have to enable the HDMI timecode output in the Timecode menu. This is not obvious and took me a while to figure out. Also remember to turn off the text overlays via “Monitoring – Output Display – HDMI” if you want a clean output.

Unable to change the SDI or HDMI output format? If Picture Cache is turned on you may not be able to change the monitoring output format settings. Temporarily turn off the picture cache function to change the output settings.

Can’t access any network functions.  Before you can use any of the cameras network capabilities you must first set up a password. Until you set up a password you will not be able to access any of the other network functions.

No Hi/Lo Key Function in CineEI: Currently there is no assignable Hi/Lo Key function in CineEI  (even though the user manual suggests that there is). The workaround is to simply raise and lower the EI to see what’s going on in the highlights and shadows. So if shooting at 800EI, temporarily lowering the EI to 200 allows you to see what’s going on in the highlights. Don’t forget to put the EI back to 800 when you are done.

I Can’t Select MLUTS For Just The Viewfinder or Outputs: A limitation of the FX9 is that you cannot have MLUTs on only the outputs and VF when the main recording format is not UHD.  You can select a global MLUT by selecting MLUT ON for Internal Rec and then the LUT is applied everywhere but this is not what you typically want. The workaround is to not use the MLUTs but instead to use Viewfinder Display Gamma Assist which is the direct equivalent of the 709(800) LUT but it can only be applied to the viewfinder itself. 

As always let me know if you feel there is anything else you would like to add. I will be creating a separate page about the cameras LUT options and limitations which are somewhat confusing. 

Advertisements