Tag Archives: arctic

Atomos Ninja V, the arctic and the Northern Lights.

I’m sitting here in the UK, Its February and it almost 20c (68f). Very nice indeed for the UK this time of year. Just a couple of weeks ago I was in Northern Norway, up above the arctic circle running one of my annual Northern Lights adventure tours. The weather there was very different. At no time did the temperature get above -15c(5f) and for most of the trip it was around -24c(-11f) both during the day and during the night.

Now, you might consider me a sadist when I say this, but for my Northern Lights trips I normally want it to be -20c or colder. The reason being that when it’s very cold like this we normally get beautifully clear skies. And we need clear skies to see the Aurora.

DSC_0249 Atomos Ninja V, the arctic and the Northern Lights.
Everyone all wrapped up for the hour long ride by snow scooter and sledge to the cabins that we stay at.

After many years of taking a full size video camera up to Norway I decided to go light this year and just take my trusty A7S and A6300 cameras. We get around on snow scooters and on sledges towed behind the snow scooters. This can make lugging around a larger camera tricky and there are times when you just can’t take a big camera. But in order to get the very best from these cameras I also decided to take an Atomos Ninja V.

DSC_0253 Atomos Ninja V, the arctic and the Northern Lights.
Out and about on the snow scooter. It really is a very beautiful place in the winter.

The Ninja V is the first of a new generation of recorders and monitors from Atomos. It’s much smaller than the Shogun range of recorders making it a better size and weight match for smaller cameras and DSLR’s. It has a very, very nice 5″ screen with a maximum brightness of 1000 Nits. The 1000 Nit output and Atomos’s clever way of driving it means it can display both SDR and HDR images depending on how it is set up. A key difference between the Shogun and the Ninja devices is that the Shoguns have both SDI inputs and HDMI inputs while the Ninja only has an HDMI input. But if your using this with a DSLR than only has an HDMI output, as I was, the lack of SDI connectors is not a problem.

DSC_0281 Atomos Ninja V, the arctic and the Northern Lights.
Shooting a sunset with the Ninja V on my A6300. We were way up on the Finnmarksvidda when this image was taken, absolutely in the middle of nowhere and it was -27c!

The build quality of the Ninja V is really good. Most of the body is made of aluminium. The rear part where the slots for the SSD and battery are is made from plastic, but it appears to be a good high quality and tough plastic. A new feature is an “AtomX” expansion port tucked inside the battery compartment. The expansion port allow different modules to be attached to the Ninja V to add functionality such a video over IP (ethernet) using the Newtek NDI protocol for live streaming or to turn the Ninja V into an IP connected monitor. There is also an AtomX sync module that allows you to wirelessly synchronise timecode and control multiple Ninja V”s on a single network and to use Bluetooth remote control. You can find out more about the AtomX modules here https://www.atomos.com/AtomX

Anyway – back to Norway. We were very lucky with the weather, and with the Northern Lights. On the first night at the cabins we stay at the Aurora put on a pretty good display. I was shooting with my Sony A7S with a Sigma Art 20mm f1.4 lens. I was shooting a mix of time-lapse, in which case I simply record the raw frames in the camera on it’s internal SD cards as well as real time video.

DSC09536-small Atomos Ninja V, the arctic and the Northern Lights.
The Aurora put on a great display for us on several nights.

The Northern Lights are only rarely very bright. Most of the time they are fairly dim. So I was using the Sigma lens wide open, shooting at 24fps and with the shutter at 1/24th. The adjusting the cameras ISO to get a nice bright image. At times this did mean I was using some very high ISO’s with a lot of gain. Shooting like this is going to put a lot of strain on any codec. But the Long GOP XAVC-S codec used in the A7S is going to be very hard pushed to not introduce a lot of additional artefacts. In addition my older original A7S can only record HD internally.

By using the Ninja V I was able to record video of the Northern Lights in 4K using the ProRes codec. I used ProRes HQ and ProResHQ uses much less compression than XAVC-S. So even though both the internal recordings and the external recordings are limited to 8 bit (due to the cameras HDMI output limitations rather than any limitation of the Ninja) the ProRes recordings are far more robust and will noise reduce in post much better than the XAVC-S.

DSC_0278-crop Atomos Ninja V, the arctic and the Northern Lights.
Just to prove it really was -27c!!

When you’re working outside for extended periods and it’s -27c(-17f) it’s tough on the gear and tough on you. When shooting the Aurora my camera are outside all night, exposed to the cold. Typical problems include frost and ice on the front element of the lens. The moisture from your own body can easily freeze onto the lens if you stand close to the camera. If you look at the lens to check it for frost and breath out you will leave it coated in ice.

Wires and cables that are soft and flexible in normal temperatures become as stiff as steel rods and can crack and fracture if you try to bend them. All batteries will loose some of their capacity. Very small batteries are worst affected. Larger batteries tend to fair a bit better, but there is a tremendous difference between the way most cheap budget batteries behave in the cold to good quality brand name batteries. For this reason I power my complete setup from a single PAG PAGLink V-Mount battery. The PAGlink batteries are great for all sorts of different applications, but for these trips a big benefit is that a small plug type charger can be used to charge many PAGlink batteries by stacking the batteries together. Then to power multiple devices I use the clip-on PAG Power hub plate to provide 5V for the camera battery adapters that I use, 12V for the lens heaters I use and another 12V feed for the Ninja V.

DSC_0311 Atomos Ninja V, the arctic and the Northern Lights.
This is what the kit looks like when you bring it into the warm after many hours out in the cold. The thing with the yellow strap on the lens is a lens heater to prevent frost from building up on the lens. The lens is a sigma 20mm f1.4, the camera is an A7S and the recorder is the Atomos Ninja V.

After more than a few minutes outside the camera kit itself will have become extremely cold. If you then take that kit inside into a nice warm cabin the warm moist air in the cabin will condense onto the cold camera body. Because the camera body will be extremely cold this will then freeze. Before you know it the camera kit is covered in ice. What you can’t see is that it’s likely that there will also be some ice and moisture inside the camera. It can take hours to warm the camera back up again and get it dried out properly. Bagging the camera before you take it indoors can help, but taking the camera in and out many times over the coarse of a shoot like this can cause a lot of damage. So I prefer to leave all the camera kit outside for the duration of the trip.

DSC_0314 Atomos Ninja V, the arctic and the Northern Lights.
Another view of the frozen Ninja V after a night shooting the Aurora. Don’t worry, the screen isn’t damaged, that’s just frost and ice on the screens surface.

This means that when you come to fire it up you are often trying to switch on an absolutely frozen camera. In the past I have had problems with cold recorders that wouldn’t start up. But I’m pleased to report that the Ninja V always came to life no matter how cold it was. Whenever I pressed the record button it went into record. Operating the touch screen in the cold was not an issue. In fact using touch screen gloves, the Ninja was really easy to use. Pressing small fiddly buttons isn’t easy, even with thin gloves, but the touch screen turned out really easy to work with.

A big change on the Ninja V over previous models is the operating system. The new operating system looks really good and is quite logically laid out. Gone is the old AtomHDR slider that changes the brightness of the screen when in HDR. This is replaced with dedicated viewing modes for Native, 709, PQ HDR and HLG HDR and viewing via a LUT. I prefer the new fixed HDR modes over the Atom HDR slider modes as it eliminates the uncertainty that can sometimes creep in when you use a slider to change the brightness of the display. In my case, when shooting during the day using S-Log2 I would simply select S-Log2 as the source and then use PQ to display an HDR image on the screen. At night when shooting the Aurora I used Rec-709.

DSC_0283 Atomos Ninja V, the arctic and the Northern Lights.
You can see how the normal size 2.5″ SSD sticks out a bit from the side of the Ninja V. The SSDMini’s don’t stick out in the same way. Also note that even though I am shooting using S-Log2 on the A6300 the Ninja V is showing a nice contrasty image thanks to the PQ HDR display option.

The Ninja V can take the same size 2.5″ SSD caddies as the current Shogun recorders. So I was able to use the SSD’s that I already own. However to keep the size of the recorder down it has been designed around a new slightly shorty SSD form factor called SSDMini. When you use a standard size 2.5″ SSD it does stick out from the side of the recorder by about 25mm. If you use an SSDMini it doesn’t stick out at all. SSDMini’s are currently being manufactured by Angelbird and Sony. They have the same sata connector as regular 2.5″ SSD’s and the SSDMini’s can also be used on the larger Atomos Shoguns.

DSC_0286 Atomos Ninja V, the arctic and the Northern Lights.
A basic lightweight but effective setup. Atomos Ninja V, Sony A6300, Miller Compass 15 head and Solo tripod.

By the time we were ready to leave Norway we had seen the Northern Lights on 3 different nights. By day we had seen some beautiful sunrises as well as other optical effects like sun dogs caused by the light from the sun being refracted by ice crystals in the air. The Atomos Ninja V had impressed me hugely. It just worked perfectly despite the extreme cold. It allowed me to record at higher quality than would have been possible without it and turned out to be easy to operate. What more can you want really?

Fancy joining me on one of these trips? Follow the link to find out more: https://www.xdcam-user.com/northern-lights-expeditions-to-norway/

Tips for shooting in very cold weather.

1658530_10202505649260911_1293166568_o-1-600x466 Tips for shooting in very cold weather.(Updated 12/2023)

With winter well upon us I thought it would be good to share some of my arctic shooting experience. I’ve shot in temperatures down to -45c in the arctic in winter.

Overall modern tapeless cameras do OK in extreme cold. The most reliable cameras are generally larger solid state cameras. Larger cameras cool slower than small ones and larger cameras will hold on to heat generated internally better than small ones. Cameras and electronics with lots of cooling vents can sometimes also be troublesome as the vents allow them to cool more quickly. But cold is not necessarily going to be the biggest problem.

IMPORTANT NOTE: It is EXTREMELY dangerous to charge normal  lithium batteries that are below freezing. Below freezing the lithium in the battery migrates to the anode of the battery cell. This cuase permanent damage to the battery shortening its life and if enough builds up around the anode it can short the battery out causing a sudden fire/explosion. Each time you charge a very cold lithium battery more lithium builds up. It is possible for a lithium battery that has been charged when very cold to suddenly burst into flames some weeks/months/years later if bumped or knocked causing the lithium build around the anode to shift. Always warm up any lithium batteries before attempting to charge them.

©-Jan-Helmer-Olsen-Ravnastua_2017-0006-600x338 Tips for shooting in very cold weather.
Filming in a remote arctic area. Photo by Jan Helmer Olsen.

Condensation:

Condensation is the big deal breaker. When you take the very cold camera inside into a warm house/hotel/car/tent you will get condensation. If the camera is very cold this can then freeze on the body of camera including the glass of the lens. If there is condensation on the outside of the camera, there will almost certainly also be condensation inside the camera and this can kill your camera.

To prevent or at least reduce the condensation you can place the camera in a large ziplock or other sealed bag BEFORE taking it inside, take the camera inside in the bag. Then allow the camera to warm up to the ambient temperature before removing it from the bag. Peli cases are another option, but the large volume of the pelicase means there will be more moisture inside the case to condense and the insulating properties of the case mean that it could take many, many hours to warm up.

I don’t recommend storing a cold or damp camera in a Pelicase (or any other similar waterproof case) as there is nowhere for the moisture to go, so the camera will remain damp until the case is opened and everything dried out properly.

DSC_0899-600x450 Tips for shooting in very cold weather.

Rather than moving a camera repeatedly from outside to inside and repeatedly generating risky condensation you should consider leaving the camera outside. You can leave the camera outside provided it does not get below -30c. Below -30c you risk the LCD panel freezing and cracking. LCD  panels freeze at between -30 to -40c. If you are using a camera in very cold conditions and you notice the edges of the LCD screen going blue or dark you should start thinking about warming up that LCD panel as it may be close to freezing.

LCD displays will become slow and sluggish to respond in the cold. Your pictures may look blurry and smeary because of this. It doesn’t affect the recording, only what you see on the LCD.

Very often in cold regions houses will have an unheated reception room or porch. This is a good place to store your camera rather than taking it inside into the warm. Repeatedly taking a camera from cold to warm without taking precautions against condensation will shorten the life of your camera.
If you can, leave the camera on between shots. The camera generates some heat internally and this will prevent many issues.

IMG_7913-600x400 Tips for shooting in very cold weather.

BATTERY LIFE:

Li-Ion batteries are effected by the cold but they are not nearly as bad as Nicads or NiMh batteries which are all but useless below freezing. li-Ion battery life gets reduced by between 25 and 50% depending on how cold it is and the quality of the battery (very cheap cells may have a higher water content which can freeze causing the cell to dramatically lose capacity and the ability to deliver power).
Down to about -10c there is only a very marginal loss of capacity. Down to -25c you will lose about 20%-30% below -25c the capacity will fall away further and it becomes impossible to use the full capacity of the battery.

Keep your spare batteries in a pocket inside your coat or jacket until you need them. After use let the battery warm up before you charge it if you can. Charging a very cold battery will reduce the lifespan of the battery and it won’t fully charge (see note above – DO NOT CHARGE a battery that is below freezing, it is very dangerous). One top tip for shooting outside for extended periods is to get a cool box. Get some chemical hand warmers or better still electric rechargeable handwarmers and place them in the cool box with your batteries to keep them warm. If you don’t have hand warmers you can also use a hot water bottle. Chemical hand warms typically use an iron powder mixed with salts. The heat comes from the iron rapidly rusting. This process needs moisture to work. A chemical handwarmer will work great in a pocket close to your body moisture but when it is very cold there isn’t enough moisture in the air for a chemical warmer to work when it is away from your body moisture. As a result chemical warmers inside camera covers or in a cool box might not actually produce any heat.

Watch your breath

If your lens has and snow or ice on it, don’t be tempted to breath or blow on the lens to blow the ice off.  Do not to breath on the lens when cleaning it as your warm breath will condense on the cold glass and freeze.  Also try to avoid breathing out close to the viewfinder.  When it is very cold and if you are warm in your nice thick winter clothes even standing close to the camera can lead to frost and ice building up on it.  Small amounts of sweat from your body will evaporate and this moisture will find its way to the camera, even if you are a few feet (1 or 2m) from it. If doing a timelapse of the Northern Lights, once the camera is running you should move away from the camera.

A small soft paint brush is good for keeping your lens clean as in very cold conditions you’ll simply be able to brush and snow or ice off. Otherwise a large lens cloth.
Your lens will get cold and in some conditions you will get frost on the front element. To help combat this wrap some insulating fabric around the body of the lens. Wrist sweat bands are quite good for this or an old sock with the toes cut off.  For time-lapse long sessions in very cold weather you might want to get a lens heater for the lens. These are normally 12 volt or USB powered and wrap around the lens. They don’t use lots of power but they do warm the lens just enough to keep the worst of the condensation, dew and frost off the lens. They are sometimes also called “dew heaters” and are sold by most good telescope suppliers.

Covers.

DSC_0880-600x450 Tips for shooting in very cold weather.

Conventional plastic rain covers become brittle below about -15c and can even shatter like glass  below -20c. The clear plastic panels in other covers can also suffer the same fate. So use if you use a cover use one made out of fabric. Special insulated cold weather covers often called “polar bears” can be used and these often have pockets inside for chemical heat packs (although when very cold these don’t work, use a USB hand warmer instead). These are well worth getting if you are going to be doing a lot of arctic shooting with a larger camera and will help keep the camera warm. But for very small cameras the bulk of a thick cover can make it almost impossible to use. As an alternative wrap the camera in a scarf or cut the sleeves of an old sweater to make a tube you can slide over the camera. If you have a sewing machine you could make a simple cover out of some fleece type material.
For DSLR’s and stills cameras a balaclava can be used to cover the camera body to provide some protection. However unheated covers don’t make a big difference when the camera is outside in very cold temperatures for extended periods unless it is always left turned on, eventually the cold will get to it.

Brittle Plastic.

Plastics get brittle at low temperatures so be very gentle with anything plastic, especially things made from very hard, cheap plastic. The plastic Sony use appears to be pretty tough even at low temps. Wires and cables may become as rigid as a steel rod. Be gentle, bend then too much and the insulation may split and the cable break. I try to avoid bending any cable once it has become very cold.

Other considerations are tripods. If outside in very low temps for more than 30mins or so the grease in the tripod will become very thick and may even freeze, so your fluid damping will become either very stiff or freeze up all together. Contact your tripod manufacturer to see what temperatures their greases can be used over. Vinten and some of the other tripod companies can winterise the tripod and replace the normal grease with arctic grease. If you are unsure put your tripod head in your deep freeze at home for a few hours and see if it still works when you take it out.

Looking after yourself.

I find that the best way to operate the camera is by wearing a pair of large top quality mittens (gloves are next to useless below -15c), Consider getting a pair of Army surplus arctic mittens, they are very cheap on ebay and from surplus stores and will normally have an additional “trigger finger”. This extra finger makes it easier to press the record button and things like that.  If you can get Swedish or Finnish military winter mittens, these are amongst the best. I wear a pair of thin “thinsulate” fleece gloves that will fit inside the mittens, i can then slip my hands in and out of the mittens to operate the camera. If you can get gloves with finger tips compatible with touch screens this will allow you to use any touch functions on a camera or your phone. Get extra large mittens, then it is easier to slip your hand in and out.

I keep a chemical hand warmer inside the mittens to warm my fingers back up after using the camera (or use heated mittens powered by a USB battery pack).

The hardest thing to keep warm is your feet. If you’ll be standing in snow or standing on ice then conventional hiking boots etc will not keep your feet warm. A Scandinavian trick if standing outside for long periods is to get some small twigs and tree branches to stand on and help insulate your feet from the cold ground. If your feet get cold then you are at risk of frostbite or frost nip. Invest in or hire some decent snow boots like  Baffin’s.  There is almost nothing worse than having ice cold feet when working. Don’t forget that if you do get cold, moving around, running on the spot etc will help get your circulation going and help you to warm up. Also consider some high energy food and snacks, you will burn a lot more calories in the cold than you would do normally. Also a flask with a hot drink is always welcome.  I have an arctic clothing guide here; Arctic Clothing Guide |