A common complaint with the FX6 is that the pivots on the LCD screen are quite weak. So if you add a heavier sun shade or a magnifier loupe the screen tends to tilt and flop around. Vocas have come up with a really rather brilliant LCD support bracket that works in tandem with the existing LCD mount to turn it into a beautiful fluid damped  system.

The support bracket fits on the supplied 15mm rod normally used for the LCD screen and the the LCD screen assembly slides into the support system. It takes only seconds to fit and remove and no tools are needed so if you do want to take it off at any time you can.

Once fitted you can then add a loupe such as the FX9 loupe or another 3rd party magnifier. The support bracket incorporates a fluid damped pivot that takes the weight of the LCD and stops it sagging or drooping but at the same time allows you to adjust the angle of the screen easily. If you do need to lock it in place there is a locking screw, but normally you don’t need to use this as the fluid damping holds the screen in place very nicely.

You should note that the screen will only tilt up and down when you use the support bracket, so you can no longer fold it flat against the side of the camera, but if you are using a loupe, you can’t do that anyway.

I really like this bracket. I does add a little bit of weight, but if you are using a loupe it really adds a quality feel to the way the LCD screen moves. If you are working handheld without a loupe then it takes seconds to remove it.

For more details take a look at the video.