Tag Archives: mapping

Fixing Hot or Bright Pixels On the Sony FX3

The FX3’s larger brothers, the FX6 and FX9 have a function called “APR” that is used to periodically inspect every pixel on the sensor and normalise or map out any out of spec pixels. With modern 4K cameras having at least 8.8 million pixels the chances of a few going out of spec or being damaged by cosmic rays from time to time is quite high. So on the FX6 and FX9 you will get a reminder to perform the APR process around once a week.

From what I understand, the Alpha series cameras and FX3 also periodically perform a similar process automatically. Because these camera have a mechanical shutter to shut out any external light there is no need for any user intervention to perform this process so you will not be aware that it’s happening. On the FX6 and FX9 the user has to place a cap over the lens or sensor, hence why the camera asks you before it can happen.

But what if you find you have some bright or hot pixels with the FX3? Perhaps you have just travelled on a plane where the high altitude reduces the atmospheres damping effect of the high energy particles from space that can damage pixels. Well you can go into the camera’s menu system and force it to run its pixel mapping process which does the same thing as APR on the other cameras.

You need to go to:

MENU:  (Setup) ? [Setup Option] ? select [Pixel Mapping] and then select OK.  It doesn’t take long and I would recommend that you do this after flying on a plane or prior to any shoot where you will use large amounts of gain as this is when hot pixels are most likely to show up.