Category Archives: cinematography

cinematography, FX6, LUTs, PMW-F55, PXW-FS5, PXW-FS7, PXW-FX9, Scene Files and Luts, Venice

Film Emulation LUT’s for S-Log3 and S-Log2.

5 Comments

I’ve uploaded these LUT’s before, but they are tucked away under a slightly obscure heading, so here they are again!

There are 4 different LUTs in this set. A basic 709 LUT which is really good for checking exposure etc. It won’t give the best image, but it’s really good for getting your exposure just right. Diffuse white should be 85%, middle grey 43% and skin tones 65-70%.

Then there are 3 film emulation LUT’s that mimic 3 different types of film stock form different manufacturers. These are primarily designed for post production or for use on a client monitor on set. My recommendation is to use the 709 LUT for your viewfinder and exposure and then add the film emulation LUT later in post.

As always (to date at least) I offer these as a free download available by clicking on the links below. However a lot of work goes into creating and hosting these. I feel that this LUT set is worth $25.00 and would really appreciate that being paid if you find the LUT’s useful. Try them before you decide then pay what you feel is fair. All contributions are greatly appreciated and it really does help keep this website up and running. If you can’t afford to pay, then just download the LUT’s and enjoy using them, tell your friends and send them here. If in the future you should choose to use them on a paying project, please remember where you got them and come back and make a contribution. More contributions means more LUT offerings in the future.

Click here for the Slog3_cine-film-look-luts

Click here for the S-Log2  filmic look luts – Alisters A7S Filmic LUTS set1

Download the S-Log3/SGamut3.cine to 709(800) and S709 Legal Input Range LUTS for external ProRes recorders.

Please feel free to share a link to this page if you wish to share these LUT’s with anyone else or anywhere else.

To make a contribution please use the drop down menu here, there are several contribution levels to choose from.


Your choice:



cinematography, Shooting Tips

ISO and EI – using the right terms makes what you are doing easier to understand.

1 Comment

ISO and EI are different things and have different meanings. I find that it really helps understand what you are doing if you use the terms correctly and understand exactly what each really means.

ISO is the measured sensitivity of film stock. There is no actual direct equivalent for electronic cameras as the camera manufacturer is free to determine what they believe is an acceptable noise level. So one camera with an ISO of 1000 may be a lot more or less sensitive than another camera rated at 1000 ISO, it all depends on how much noise the manufacturer things is acceptable for that particular camera.

Broadly speaking on an electronic camera ISO is the number you would enter in to a light meter to achieve the a normally exposed image. It is the nearest equivalent to a sensitivity rating, it isn’t an actual sensitivity rating, but it’s what you need to enter into a light meter if you want to set the exposure that way.

EI is the Exposure Index. For film this is the manufacturers recommended best setting for your light meter to get the best results following the standard developing process for the chosen film stock. It is often different from the films true sensitivity rating. For example Kodak 500T is a 500 ISO film stock that has an EI of 350 when shooting under tungsten light. In almost all situations you would use the EI and not the ISO.

On an electronic camera EI normally refers to an exposure rating that you have chosen to give the camera to get the optimum results for the type of scene you are shooting. ISO may give the median/average/typical exposure for the camera but often rating the camera at a different ISO can give better results depending on your preferences for noise or highlight/shadow range etc. If you find exposing a bit brighter helps your images then you are rating the camera slower (treating it as though it’s less sensitive) and you would enter your new lower sensitivity rating into your light meter and this would be the EI.

Keeping EI and ISO as two different things (because they are) helps you to understand what your camera is doing. ISO is the base or manufacturer sensitivity rating and in most (but not all) log or raw cameras you cannot change this.

EI is the equivalent sensitivity number that you may choose to use to offset the exposure away from the manufacturers rating.

If you freely interchange ISO and EI it’s very confusing for people as they don’t know whether you are referring to the base sensitivity rating or a sensitivity rating that is not the base sensitivity but actually some kind of offset.

If you have a camera with an ISO rating of 2000 and you say “I’m shooting at 800 EI” then it’s clear that you are using a 1.3 stop exposure offset. But if you just say “I’m shooting at 800 ISO” it is less clear as to exactly what you are doing. Have you somehow changed the cameras base sensitivity or are you using an offset? While the numbers used by EI and ISO are the same, the meaning of the terms ISO and EI are importantly different.

cinematography, Shooting Tips

Learning to be a film maker? Don’t shoot short pretty videos – shoot documentaries.

3 Comments
Over the years I’ve met many well known high end cinematographers. Most of them are really no different to you or I. Most of them are passionate about their craft and almost always willing to chat about ideas or techniques. But one thing that at first surprised me  was how many of these high end movie makers cut their teeth shooting documentaries. I guess I had imagined them to have all been film school graduates that shot nothing but drama, but no, a very large percentage started out in the world of documentary production.
Documentary production is full of challenges. Location shooting, interviews, beauty shots, challenging lighting etc. But one of the big things with documentary production is that you very often don’t have a choice about what, where or when you shoot. You are faced with a scene or location needed for the story and you have to make it look good. So you have to think about how best to approach it, how to frame it, light it or how to use the available light in the best way.
A lot of todays aspiring film makers like to hone their skills by shooting beautiful people in beautiful locations when the light is at it’s best. These short beauty films very often do come out looking very nice. But, if you have a pretty girl, a pretty scene, and good light then really there is no excuse for it not to look good and the problem is you don’t learn much through doing this.
When you are shooting a typical TV documentary you will be faced with all kinds of locations, all kinds of people and the challenge is to make it all look good, no matter what your presented with. Having to take sometimes ugly scenes and make them look good you learn how to be creative. You have to think about camera angles, perhaps to hide something or to emphasise something important to the story the programme tells. And, like a feature film it is normally also story telling, most documentaries have a story with a beginning middle and end.
If you can master the art of documentary production it will give you a great set of skills that will serve you well elsewhere. If you move on from documentaries to drama, then when the director asks you to shoot a scene that takes place in a specific location you may well have already done something similar in a documentary so you may already have some ideas about how to light it, what focal lengths to use. Plus now you will probably have a more time to light and a much more control over the scene, so it should actually be easier.
 
In an ideal world I guess the best way to learn how to shoot movies is…. to shoot movies. But very often it’s hard to get the people, locations and good script that you need. So very often aspiring film makers will fall back on shooting 90 second vignettes of pretty people in pretty places as it’s easy and simple to do.
But instead I would suggest that you would be much better off shooting a documentary. Perhaps about something that happened near where you live or an issue you are interested in.
Go out and shoot  documentaries in less than perfect locations with all the challenges they present. I bet the resulting videos won’t look nearly as perfectly pretty as all those slow-mo pretty girl on a beach/forest/field of flowers videos. But it will teach you how to deal with different types locations, people, lighting, weather and many of the other things that can be challenges when shooting features. It will make you a better camera operator. Making something that’s already pretty look pretty – that’s easy. Making what would otherwise be an un-interesting living room, factory or city street look interesting, that’s a much tougher challenge that will help bring out the creativity in you.
cinematography, Shooting Tips

Noise, ISO, Gain, S-Log2 v S-Log3 and exposure.

20 Comments

Even though I have written about these many times before the message still just doesn’t seem to be getting through to people.

Since the dawn of photography and video the only way to really change the signal to noise ratio and ultimately how noisy the pictures are is by changing how much light you put onto the sensor.

Gain, gamma, log, raw, etc etc only have a minimal effect on the signal to noise ratio. Modern cameras do admittedly employ a lot of noise reduction processes to help combat high noise levels, but these come at a price. Typically they soften the image or introduce artefacts such as banding, smear or edge tearing. So you always want to start off with the best possible image from the sensor with the least possible noise and the only way to achieve that is through good exposure – putting the optimum amount of light onto the sensor.

ISO is so confusing:

But just to confuse things the use of ISO to rate an electronic cameras sensitivity has become normal. But the problem is that most people have no clue about what this really means. On an electronic camera ISO is NOT a sensitivity measurement, it is nothing more than a number that you can put into an external light meter to allow you to use that light meter to obtain settings for the shutter speed and aperture that will give you the camera manufacturers suggest optimum exposure. That’s it – and that is very different to sensitivity.

Lets take Sony’s FS7 as an example (most other cameras behave in a very similar way).

If you set the FS7 up at 0dB gain, rec-709, it will have an exposure rating of 800 ISO. Use a light meter to expose with the meters ISO dial set to 800. Lets say the light meter says set the aperture to f8. When you do this the image is correctly exposed, looks good (well as good as 709 gets at least) and for most people has a perfectly acceptable amount of noise.

Now switch the camera to S-Log2 or S-Log3. With the camera still set to 0dB the ISO rating changes to 2000 which give the impression that the camera may have become more sensitive. But did we change the sensor? No.  Have we added any more gain? No, we have not, the camera is still at 0dB. But if you now expose at the recommended levels, after you have done your grading and you grade to levels similar to 709 the pictures will look quite a lot noisier than pictures shot using Rec-709.

So what’s going on?

If you now go back to the light meter to expose the very same scene, you turn the ISO dial on the light meter from 800 to 2000 ISO and the light meter will tell you to now set the aperture to f13 (approx). So starting at the f8 you had for 800 ISO, you close the aperture on the camera by 1.3 stops to f13 and you will have the “correct” exposure.

BUT: now you are putting 1.3 stops less light on to the sensor so the signal coming from the sensor is reduced by 9dB and as a result the sensor noise that is always there and never really changes is much more noticeable. As a result compared to 709 the graded S-Log looks noisy and it looks noisier by the equivalent of 9dB. This is not because you have changed the cameras sensitivity or changed because you have changed the amount of camera gain but because compared to when you shoot in 709 the sensor is being under exposed and as a result it is outputting a signal 9dB lower. So in post production when you grade or add a LUT you have to add 9dB of gain to get the same brightness as the original direct rec-709 recording and as well as making the desirable image brighter it also makes the noise 9dB higher (unless you do some very fancy noise reduction work in post).

So what do you do?

It’s common simply to open the aperture back up again, typically by 1.5 stops so that after post production grading the S-log looks no more noisy than the 709 from the FS7 – Because in reality the FS7’s sensor works best for most people when rated at the equivalent of 800 ISO rather than 2000 – probably because it’s real sensitivity is 800 ISO.

When you think about it, when you shoot with Rec-709 or some other gamma that won’t be graded it’s important that it looks good right out of the camera. So the camera manufacturer will ensure that the rec-709 noise and grain v sensitivity settings are optimum – so this is probably the optimum ISO rating for the camera in terms of noise, grain and sensitivity.

So don’t be fooled into thinking that the FS7 is more sensitive when shooting with log, because it isn’t. The only reason the ISO rating goes up as it does is so that if you were using a light meter it would make you put less light onto the sensor which then allows the sensor to handle a brighter highlight range. But of course if you put less light onto the sensor the sensor won’t be able to see so far into the shadows and the picture may be noisy which limits still further the use of any shadow information. So it’s a trade-off, more highlights but less shadows and more noise. But the sensitivity is actually the same. Its’s an exposure change not a sensitivity change.

So then we get into the S-Log2 or S-Log3 debate.

First of all lets just be absolutely clear that both have exactly the same highlight and shadow ranges. Both go to +6 stops and -8 stops, there is no difference in that regard. Period.

And lets also be very clear that both have exactly the same signal to noise ratios. S-log3 is NOT noisier than S-log2. S-log 3 records some of the mid range using higher code values than S-Log2 and before you grade it that can sometimes make it appear like it’s noisier, but the reality is, it is not noisier.  Just like the differing ISO ratings for different gamma curves, this isn’t a sensitivity change, it’s just different code values being used. See this article if you want the hard proof: https://www.xdcam-user.com/2014/03/understanding-sonys-slog3-it-isnt-really-noisy/

Don’t forget when you shoot with log you will be grading the image. So you will be adjusting the brightness of the image. If you grade S-Log2 and S-Log3 to the same brightness levels the cumulative gain (the gain added in camera and the gain added in post) ends up the same. So it doesn’t matter which you use in low light the final image, assuming a like for like grade will have the same amount of noise.

For 8 bit records S-Log2 has different benefits.

S-Log2 was designed from the outset for recording 14 stops with an electronic video camera. So it makes use of the cameras full recording range. S-Log3 is based on an old film log curve (cineon) designed to transfer 16 stops or more to a digital intermediate. So when the camera only has a 14 stop sensor you waste a large part of the available recording range. On a 10 bit camera this doesn’t make much difference. But on a 8 bit camera where you are already very limited with the number of tonal values you can record it isn’t ideal and as a result S-Log2 is often a better choice.

But if I shoot raw it’s all going to be so much better – isn’t it?

Yes, no, maybe…. For a start there are lot’s of different types of raw. There is linear raw, log raw, 10 bit log raw, 12 bit linear, 16 bit linear and they are all quite different.

But they are all limited by what the sensor can see and how noisy the sensor is. So raw won’t give you less noise (it might give different looking noise). Raw won’t give you a bigger dynamic range so it won’t allow you to capture deeper or brighter highlights.

But what raw does normally is to give you more data and normally less compression than the cameras internal recordings. In the case of Sony’s FS5 the internal UHD recordings are 8 bit and highly compressed while the raw output is 12 bit, that’s a 4 fold increase in the amount of tonal values. You can record the 12bit raw using uncompressed cDNG or Apples new ProResRaw codec which doesn’t introduce any appreciable compression artefacts and as a result the footage is much more flexible in post production. Go up to the Sony Venice, F5 or F55 cameras and you have 16 bit raw and X-OCN (which behaves exactly like raw) which has an absolutely incredible range of tonal values and is a real pleasure to work with in post production. But even with the Venice camera the raw does not have more dynamic range than the log. However because there are far more tonal values in the raw and X-OCN you can do more with it and it will hold up much better to aggressive grading.

It’s all about how you expose.

At the end of the day with all of these camera and formats how you expose is the limiting factor. A badly exposed Sony Venice probably won’t end up looking anywhere near as good as a well exposed FS7. A badly exposed FS7 won’t look as good as a well exposed FS5. No camera looks good when it isn’t exposed well.

Exposure isn’t brightness. You can add gain to make a picture brighter, you can also change the gamma curve to change how bright it is.  But these are not exposure changes. Exposure is all about putting the optimum amount of light onto the sensor. Enough light to produce a signal from the sensor that will overcome the sensors noise. But also not so much light that the sensor overloads. That’s what good exposure is. Fiddling around with gamma curves and gain settings will only every make a relatively small difference to noise levels compared to good exposure. There’s just no substitute for faster lenses, reflectors or actually adding light if you want clean images.

And don’t be fooled by ISO ratings. They don’t tell you how noisy the picture is going to be, they don’t tell you what the sensitivity is or even if it’s actually changing. All it tells you is what to set a light meter to.

cinematography, PXW-FS5, PXW-FS7, Shooting Tips, Technology, Workflow

ProRes Raw Over Exposure Magic Tricks – It’s all smoke and mirrors!

1 Comment

There are a lot of videos circulating on the web right now showing what appears to be some kind of magic trick where someone has shot over exposed, recorded the over exposed images using ProRes Raw and then as if by magic made some adjustments to the footage and it goes from being almost nothing but a white out of over exposure to a perfectly exposed image.

This isn’t magic, this isn’t raw suddenly giving you more over exposure range than you have with log, this is nothing more than a quirk of the way FCP-X handles ProRes Raw material.

Before going any further – this isn’t a put-down of raw or ProRes raw. It’s really great to be able to take raw sensor data and record that with only minimal processing. There are a lot of benefits to shooting with raw (see my earlier post showing all the extra data that 12 bit raw can give). But a magic ability to let you over expose by seemingly crazy amounts isn’t something raw does any better than log.

Currently to work with ProRes Raw you have to go through FCP-X. FCP-X applies a default sequence of transforms to the Raw footage to get it from raw data to a viewable image. These all expect the footage to be exposed exactly as per the camera manufacturers recommendations, with no leeway. Inside FCP-X it’s either exposed exactly right, or it isn’t.

The default decode settings include a heavy highlight roll-off. Apple call it “Tone Mapping”. Fancy words used to make it sound special but it’s really no different to a LUT or the transforms and processes that take place in other raw decoders. Like a LUT it maps very specific values in the raw data  to very specific output brightness values. So if you shoot just a bit bright – as you would often do with log to improve the signal to noise ratio – The ProRes raw appears to be heavily over exposed. This is because anything bright ends up crushed into nothing but flat white by the default highlight roll off that is applied by default.

In reality the material is probably only marginally over exposed, maybe just one to 2 stops which is something we have become used to doing with log. When you view brightly exposed log, the log itself doesn’t look over exposed, but if you apply a narrow high contrast 709 LUT to it, it then the footage looks over exposed until you grade it or add an exposure compensated LUT.  This is what is happening by default inside FCP-X, a transform is being applied that makes brightly exposed footage look very bright and possibly over exposed – because thats the way it was shot!

This is why in FCP-X  it is typical to change the color library to WCG (Wide Color Gamut) as this changes the way FCP-X processes the raw, changing the Tone Mapping and most importantly getting rid of the highlight roll off. With no roll-off, highlights and any even slight over exposure will still blow out as you can’t show 14 stops on a conventional 6 stop TV or monitor. Anything beyond the first 6 stops will be lost, the image will look over exposed until you grade or adjust the material to control the brighter parts of the image and bring them back into a viewable range. When you are in WCG mode in FCP-X the there is no longer a highlight roll off crushing the highlights and now because they are not crushed they can be recovered, but there isn’t any more highlight range than you would have if you shot with log on the same camera!

None of this is some kind of Raw over exposure magic trick as is often portrayed. It’s simply not really understanding how the workflow works and appreciating that if you shoot bright – well it’s going to look bright – until you normalise it in post. We do this all the time with log via LUT’s and grading too! It can be a little more straight forward to recover highlights from Linear Raw footage as comes form an FS5 or FS7 compared to log. That’s because of the way log maintains a constant data level in each highlight stop and often normal grading and colour correction tools don’t deal with this correctly. The highlight range is there, but it can be tricky to normalise the log without log grading tools such as the log controls in DaVinci Resolve.

Another problem is the common use of LUT’s on log footage. The vast majority of LUT’s add a highlight roll off, if you try to grade the highlights after adding a LUT with a highlight roll off it’s going to be next to impossible to recover the highlights. You must do the highlight recovery before the LUT is added or use a LUT that has compensation for any over exposure. All of these things can give the impression that log has less highlight range than the raw from the same camera. This is not normally the case, both will be the same as it’s the sensor that limits the range.

The difference in the highlight behaviour is in the workflows and very often both log and raw workflows are miss-understood. This can lead to owners and users of these cameras thinking that one process has more than the other, when in reality there is no difference, it’s appears to be different because the workflow works in a different way.

cinematography, PXW-FS5

Why I Choose To Shoot ProRes Raw with the FS5

17 Comments

This is a much discussed topic right now, so as I promised in my last article about this, I have put together a video. Unfortunately YouTube’s compression masks many of the differences between the UHD XAVC and the ProRes Raw, but you can still see them, especially on the waveform scopes.

To really appreciate the difference you should watch the video on a large screen at at high quality, preferably 4K.

cinematography, Everything Else, HDR, Venice

Philips Extreme Earth Episode 2 now on YouTube.

Leave a comment

This is a part of a much larger project I have been working on recently for Philips. The Philips “Extreme Earth” project. The idea being to show of some of the latest technologies in their HDR Ambilight TV’s.

Last year we started the project up in Norway filming the Northern Lights. This year we travelled to Nevada and Arizona to shoot the second set of films under the “Canyon” headline, then we spent another couple of weeks travelling all over the Midwest shooting what will be the 3rd set of films under the headline “Storm”. We are now looking ahead to next year with several ideas being looked at from Volcanoes to Rain Forests.

For the Norway and Canyon shoots competitions were run ahead of the shoots in various consumer technology magazines . The winners getting to come on our adventures, stay in nice hotels and take part in various activities such has horse riding.

The main Canyon film was shot by myself on a Sony Venice using Sigma FF Primes as well as an Angenieux EZ zoom. The 1000fps Super Slow motion by Dustin Farrell on a Phantom Flex. I shot some additional 4K 120fps footage on an FS5 on a gimbal recording ProRes raw to a Shogun (horse riding and some tracking shots). The interviews and behind the scenes footage was shot by the projects director Leigh Emmerson of Persistence of Vision Productions (POV) using an A7sII, but there is a fair bit of FS5 (ProRes Raw) footage that I shot in there too.

The main film was produced at 60fps in HDR (I did the grade and encoding) and will be shown at the IFA trade show next month. The other films are all SDR.
Here is the HDR main video. To view this correctly ensure your HDR TV or HDR monitor is set to HDR10 (ST2084 gamma with Rec2020 colour).

Here is the “Making Off” video.

Here’s a video of the Canyon launch event:

cinematography, Shooting Tips

Log and Raw Don’t have highlight a highlight roll off.

3 Comments

This just keeps coming up over and over. Almost all log gamma curves and the majority of raw recording formats don’t have a highlight roll-off. Any roll off that you might see is probably in the LUT’s that you are using.

The whole point of log and raw is to capture as much information about the scene that you are shooing as you can. Log normally achieves this by recording every stop above middle grey with a constant amount of data, so even the very brightest stop has the same amount of recording data as the ones below it – there is no roll off.

In conventional limited range recordings such as Rec-709, hypergamma, cinegamma etc, highlight roll-offs work by reducing the contrast in the highlights to make the amount of data needed to record the very brightest stops much smaller than used for the rest of the image. This allows 2 or 3 stops to be squeezed into a very small recording range, keeping most of the recording data available for a nice bright high contrast image. The reduction in contrast in the extreme highlights helps hide any highlight handling problems and makes it appear as though the sensors clipping point is reach in a more pleasing soft manner.

But you don’t want this in a log or raw recording as it makes grading much harder as the footage will contain different contrast ranges, each needing it’s own grading adjustments. Also by reducing contrast in the highlights you are reducing the data. It would be very difficult to un-pick a highlight roll off and if you did want to expand the data back out you will get issues such as banding.

Chart showing S-Log2 and S-Log3 plotted against f-stops and code values. Note how little data there is for each of the darker stops, the best data is above middle grey and there is no highlight roll-off. Note that current sensor only go to +6 stops over middle grey so S-Log2 and S-Log record to different peak levels.

S-Log2 and S-Log3 like almost all log gammas have no highlight roll-off. The only roll off is from middle grey and down. So if you underexpose you will start to roll away the data in your scenes mid range and that’s not good. Expose for the mid range, this is the most important part of any image. If your highlights are a bit clipped don’t worry about this too much. In post production you can add a roll off in the grade that will make any clipped highlights roll away gently. Adding a bit of highlight diffusion in post will also nicely mask any clipped highlights and make them look natural.

cinematography, Shooting Tips

When is a viewfinder a viewfinder and when is it just a small monitor?

3 Comments

It’s interesting to see how the term viewfinder is now used for small monitors rather than monocular viewfinders or shrouded dedicated viewfinders. Unless the a monitor screen is properly shielded from external light then you can only guess at the contrast and brightness of the images feeding it in anything other than a dim/dark room.

This is one of the key reasons why for decades viewfinders have been in fully shrouded hoods, snoots or loupes. As one of the key roles of a viewfinder is to show how your recordings will look for exposure assessment, if it doesn’t have a full shroud then in my opinion it isn’t a viewfinder, it is simply a monitor and exactly what your images will look like is anyones guess depending on the ambient light conditions. Furthermore even a young person with perfect can’t focus properly at less than 6″/150mm and that distance increases with age or in low ambient light. So most people will need a loupe or magnifying lens to be able to make full use of a small HD LCD for critical focus. In order to be able to see the sharpness of an image you need contrast, so an unshaded LCD screen on a sunny day will be next to useless for focus – perhaps this is why I see so many out of focus exterior shots on TV these days?

To be truly useful a viewfinder needs to be viewed in a controlled and dark environment. That’s why for decades it has been normal to use a monocular viewfinder. The eyepiece creates a tightly controlled, nice and dark,  viewing environment. This isn’t always convenient. I will often flip up or remove the eyepiece for certain types of shot. But – if you don’t have the option to fully shade the viewfinder – how do you work with it on a sunny day? On a camera like the FS5 I often find myself using the small, enclosed viewfinder on the back of the camera when the sun is bright. These tiny built in viewfinders are not ideal, but I’d rather have that than a totally washed out LCD or trying to shoot with a jacket over my head as my only option.

So next time you are looking at upgrading the monitor or viewfinder on your camera do try out a good 3rd party monocular viewfinder such as the Zacuto Gratical or Zacuto Eye. Perhaps consider a Small HD monitor with the  Side Finder option. Or an add-on monocular for the existing LCD panel. Without that all important shading and magnification it isn’t really a viewfinder, it’s just a small LCD monitor and in anything other than a very dim environment it’s always going to be tough to judge focus and exposure.

cinematography, Everything Else, shoots

Duran Duran’s A Diamond In The Mind – A look back at a great project.

2 Comments

Tonight the BBC are running a series of programmes about legendary 80’s pop band Duran Duran. At the same time Sky television in the UK have made one of my the projects I am most proud to have been involved in available for free, in HD,  and on demand – A Diamond In The Mind. In 2011 I was involved in the planning and filming of  this Duran Duran concert. Originally conceived a s a lowish cost production to be shot in at a small venue in Berlin, the shoot was full of challenges, not least of which was the cancellation of the Berlin concert just hours before it’s start when the lead singer Simon LeBon suffered damaged vocal chords.

We were right in the middle of building up the cameras at the Berlin concert hall when the news came through.

PMW-F3’s being prepped in Berlin for the concert that never happened

With the cancellation of the Berlin gig the whole scope of the project changed as the next opportunity to shoot would be at one of the huge arena events in the UK. In 1984 Duran Duran produced a film called “Arena”. This was a truly epic concert video that covered several legs of their sold out arena and stadium tour of 1983. While we were never going to replicate this on our much more modest budget, it certainly gave us something to aim for.

The idea was to film the concert with what was at the time ground breaking large sensor video cameras to achieve a film like look. Duran Duran are famous for their videos so we were following in some pretty big footsteps. The majority of the cameras were Sony PMW-F3’s with a custom picture profile that I developed specifically for the shoot. Other cameras included (if I remember right) a couple of FS100’s, some GoPro’s on stage and right at the very back of the Venue there was a Red One shooting a big 4K wide shot.

I got the opportunity to test the camera settings the week before the shoot at a concert at the O2 arena. After that there was just a single concert to film, so we had to get everything just right.

The day of the gig was a typical dark and gloomy winters day in Manchester. Inside the vast Manchester arena we were busy fitting lenses to camera. Sorting out cue sheets, organising talkback links and all those other things needed for a multi camera concert shoot.

Angenieux 24-290 T2.8 lenses on Sony PMW-F3’s at the MEN Manchester.

We had some very exotic lenses, several Angenieux 24-290 T2.8’s. At my camera position I was using a 40x ENG lens with one of the 2/3″ to super35mm adapters I had designed. The focal length of this lens was the equivalent of 1000mm at f4. The depth of field was paper thin!

Getting ready to shoot Duran Duran with a 1000mm zoom lens!

The concert started and the filming went ahead. It seem to all be over very quickly, all that preparation, all those tests for just 2 hours of filming. And then the shoot was over.

Post production took quite a while as band member Nick Rhodes chose to add a lot of his own elements to the edit. Each track in the film has a slightly different look, but it was all worth it. The end result was the feature length film “A Diamond In The Mind”.  It’s a project that was amazing to work on, with an amazing crew put together by Hangman Films. Today, 7 years later I still think it looks pretty damn good. I’d love to go back to the rushes and produce an HDR version!

As well as being on Sky TV in the UK you can also find the film on YouTube: https://www.youtube.com/watch?v=d0iN4xn6afI